Material | Cast iron |
d | 35 | mm | |
A | 49 | mm | |
A1 | 31 | mm | |
B1 | 46 | mm | |
H | 99 | mm | |
H1 | 49.2 | mm | |
H2 | 18 | mm | |
J | 136.5 | mm | |
J | max. | 145 | mm |
J | min. | 128 | mm |
L | 184 | mm | |
N | 25.5 | mm | |
N1 | 17 | mm | |
s1 | 27.5 | mm | |
Values for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 170 | mm | |
J7 | 17.5 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 30.7 | kN | |
Basic static load rating | C0 | 19 | kN | |
Fatigue load limit | Pu | 0.8 | kN | |
Limiting speed | 4800 | r/min |
Mass bearing unit | 2.17 | kg |
Appropriate spanner | HN 8-9 | |||
Recommended lock nut tightening angle | a | 105 | ° | |
Recommended diameter for attachment bolts, mm | G | 14 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5625 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22208 EK | 40 | 80 | 23 | Bearings, units and housings |
---|---|---|---|---|
27271 | 69.85 | 88.9 | 6.35 | Seals |
32 VS R | 29 | - | - | Seals |
3308 DMA | 40 | 90 | 36.5 | Bearings, units and housings |
38x74x11 CRWA1 R | 38 | 74 | 11 | Seals |
AOH 24068 | 320 | 340 | 206 | Bearings, units and housings |
BD-C 31/530 KM-AOH 31/530 | 500 | 870 | 272 | Bearings, units and housings |
K 125x133x35 | 125 | 133 | 35 | Bearings, units and housings |
NA 2205.2RS | 25 | 52 | 18 | Bearings, units and housings |
OKC 310 | 310 | - | ||
RNA 4917 | 100 | 120 | 35 | Bearings, units and housings |
SY 1.1/2 TF/VA228 | 38.1 | - | - | Bearings, units and housings |
Hot number:
14423
BD-22236 CCK/W33-AH 2236 G
22x47x7 HMSA10 V
250x285x15 HMS5 V
6231
BEAM 020068-2RZ/PE
FYTB 1.15/16 TDW
HA 215
IR 10x14x13
MVR1-70
PF 17 FM
RN-1.5x7.8 BF/G2
S71913 ACD/P4A
S7213 CD/P4A
W 630/3 R-2Z
Previous:SYJ 35 TF Bearings, units and housings ---- Next:SYJ 40 TF Bearings, units and housings
Return to SKF bearing