Material | Cast iron |
d | 90 | mm | |
A | 88 | mm | |
A1 | 54 | mm | |
B | 89 | mm | |
H | 200.5 | mm | |
H1 | 101.6 | mm | |
H2 | 33 | mm | |
J | 262 | mm | |
J | max. | 270 | mm |
J | min. | 254 | mm |
L | 327 | mm | |
N | 35 | mm | |
N1 | 27 | mm | |
s1 | 54 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 8.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 303 | mm | |
J7 | 32 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 95.6 | kN | |
Basic static load rating | C0 | 72 | kN | |
Fatigue load limit | Pu | 2.7 | kN | |
Limiting speed | 2000 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 12.7 | kg |
Hexagonal key size for grub screw | N | 6 | mm | |
Recommended tightening torque for grub screw | 28.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 22 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.875 | in |
Housing | ||||
Bearing |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
17709 | 44.45 | 76.2 | 7.95 | Seals |
---|---|---|---|---|
380x420x20 HDS2 R | 380 | 420 | 20 | Seals |
71922 ACD/P4AL | 110 | 150 | 20 | Bearings, units and housings |
87783 | - | - | 20 | Seals |
BC4B 326261/HA1 | 475 | 600 | - | Bearings, units and housings |
C 2244 K | 220 | 400 | 108 | Bearings, units and housings |
IR 30x35x20.5 | 30 | 35 | 20.5 | Bearings, units and housings |
NKS 43 | 43 | 58 | 22 | Bearings, units and housings |
RNU 308 ECJ | 52 | 90 | 23 | Bearings, units and housings |
SHR 95 | 95 | - | - | Coupling systems |
SAFS 22526 T | 112.7125 | - | - | Bearings, units and housings |
SSAFS 23056 KATLC x 9.15/16 | 252.4125 | - | - | Bearings, units and housings |
Hot number:
145x175x15 HMS5 V
23446
26298
305180
32540
38x55x7 HMSA10 V
608/HR22T2
90773
NJ 1034 ML
SAF 1615 TLC
SNL 3044 ATURT
SAW 23536 x 6.5/16 T
SNW 3036x6.5/16
SSAFS 22528 x 4.7/8
W 61703-2RS1
Previous:SYJ 80 TF Bearings, units and housings ---- Next:SYK 20 TD Bearings, units and housings
Return to SKF bearing