| Material | Composite | |||



| d | 35 | mm | |
| A | 45 | mm | |
| A1 | 27 | mm | |
| A5 | 22 | mm | |
| B1 | 39.5 | mm | |
| H | 93.5 | mm | |
| H1 | 47.6 | mm | |
| H2 | 19 | mm | |
| J | 126 | mm | |
| J | max. | 133 | mm |
| J | min. | 119 | mm |
| L | 164 | mm | |
| N | 21.5 | mm | |
| N1 | 14.5 | mm | |
| s1 | 24.3 | mm |
Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position).
| Basic dynamic load rating | C | 25.5 | kN | |
| Basic static load rating | C0 | 15.3 | kN | |
| Fatigue load limit | Pu | 0.655 | kN | |
| Limiting speed | 1100 | r/min |
| Mass bearing unit | 0.68 | kg |
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 7.4 | N·m | ||
| Appropriate SKF mounting kit | 626830 | |||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 16004/HR11TN | 20 | 42 | 8 | Bearings, units and housings |
|---|---|---|---|---|
| 32222/DF | 110 | 200 | - | Bearings, units and housings |
| 40 VS R | 36 | - | - | Seals |
| 417002 | 1540 | - | - | Seals |
| 6209-2Z/VA228 | 45 | 85 | 19 | Bearings, units and housings |
| 70/500 AM | 500 | 720 | 100 | Bearings, units and housings |
| C 39/800 M | 800 | 1060 | 195 | Bearings, units and housings |
| HN 1612 | 16 | 22 | 12 | Bearings, units and housings |
| N 324 ECM | 120 | 260 | 55 | Bearings, units and housings |
| NJ 2314 ECP | 70 | 150 | 51 | Bearings, units and housings |
| NNU 4192 K30M | 460 | 760 | 300 | Bearings, units and housings |
| PCM 141620 E | 14 | 16 | 20 | Bearings, units and housings |
Hot number:
260x290x16 HDS2 D
199 VS V
26x38x7 HMS5 V
31312
38x56x8 CRW1 R
524231
618/4
67560
71917 ACB/HCP4AL
7312 BECBM
9068
NU 2216 ECJ
SAFS 22517-11 x 3 TLC
SAL 15 ES
W 61918
Previous:SYK 30 WD Bearings, units and housings ---- Next:SYK 35 LF Bearings, units and housings
Return to SKF bearing