| Material | Composite | |||



| d | 40 | mm | |
| A | 48 | mm | |
| A1 | 30 | mm | |
| A5 | 23.5 | mm | |
| B1 | 42.9 | mm | |
| H | 99.5 | mm | |
| H1 | 49.2 | mm | |
| H2 | 19 | mm | |
| J | 136 | mm | |
| J | max. | 143 | mm |
| J | min. | 129 | mm |
| L | 176 | mm | |
| N | 21.5 | mm | |
| N1 | 14.5 | mm | |
| s1 | 25.9 | mm |
Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position).
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 950 | r/min |
| Mass bearing unit | 0.86 | kg |
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 7.4 | N·m | ||
| Appropriate SKF mounting kit | 626830 | |||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 20x30x7 HMS5 V | 20 | 30 | 7 | Seals |
|---|---|---|---|---|
| 210-ZNR | 50 | 90 | 20 | Bearings, units and housings |
| 6206 | 30 | 62 | 16 | Bearings, units and housings |
| 709 ACD/P4AH | 9 | 24 | 7 | Bearings, units and housings |
| 71919 ACD/HCP4AH1 | 95 | 130 | 18 | Bearings, units and housings |
| 7210 ACD/HCP4A | 50 | 90 | 20 | Bearings, units and housings |
| 95620 | 242.8748 | 301.2186 | - | Seals |
| GEH 25 ESX-2LS | 25 | 47 | 28 | Bearings, units and housings |
| NUP 2208 ECP | 40 | 80 | 23 | Bearings, units and housings |
| NKXR 20 | 20 | 30 | 30 | Bearings, units and housings |
| SYNT 60 L | 60 | - | - | Bearings, units and housings |
| YAR 214-208-2F | 63.5 | 125 | 69.9 | Bearings, units and housings |
Hot number:
16044
20866
30230T168/DB
31494
404853
470486
6026-2RS1
7007 ACD/HCP4AH
78020
86973
87526
N 1024 KTN9/SP
NNCF 5024 CV
S71909 ACB/HCP4A
SNL 3136 ATURA
Previous:SYK 35 WD Bearings, units and housings ---- Next:SYK 40 LF Bearings, units and housings
Return to SKF bearing