| Material | Composite for food and beverage | |||



| d | 19.05 | mm | |
| A | 32 | mm | |
| A1 | 21 | mm | |
| A5 | 26.3 | mm | |
| B | 31 | mm | |
| H | 64 | mm | |
| H1 | 33.3 | mm | |
| H2 | 16 | mm | |
| J | 96 | mm | |
| J | max. | 101 | mm |
| J | min. | 91 | mm |
| L | 126 | mm | |
| N | 17.5 | mm | |
| N1 | 12.5 | mm | |
| s1 | 18.3 | mm |
| Basic dynamic load rating | C | 12.7 | kN | |
| Basic static load rating | C0 | 6.55 | kN | |
| Fatigue load limit | Pu | 0.28 | kN | |
| Limiting speed | 5000 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.27 | kg |
| Hexagonal key size for grub screw | N | 3.175 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 250x285x15 HMSA10 V | 250 | 285 | 15 | Seals |
|---|---|---|---|---|
| 40x62x6 HMS5 RG | 40 | 62 | 6 | Seals |
| 40x62x7 HMS5 V | 40 | 62 | 7 | Seals |
| 42x66x10 HMSA10 V | 42 | 66 | 10 | Seals |
| 55 VA R | 49 | - | - | Seals |
| 7011 ACD/HCP4AL | 55 | 90 | 18 | Bearings, units and housings |
| 7207 BEGAP | 35 | 72 | 17 | Bearings, units and housings |
| 86737 | - | - | 25.4 | Seals |
| 99787 | 200.025 | 212.725 | 38.1 | Seals |
| NNF 5022 ADA-2LSV | 110 | 170 | 80 | Bearings, units and housings |
| PCZ 1624 M | 25.4 | 28.575 | 38.1 | Bearings, units and housings |
| WS 81210 | 50 | 6.5 | Bearings, units and housings |
Hot number:
14x25x5 HMSA10 RG
170x200x15 HMSA10 V
2316
23288 CA/W33
38x55x10 HMSA10 RG
870 VRME R
99775
FY 1.3/4 RM
GS 89430
IR 20x24x16
KMFE 9 H
NCF 2938 CV
S7214 ACD/HCP4A
SI 35 TXE-2LS
ZW 40x47
Previous:SYWK 25 YTH Bearings, units and housings ---- Next:SYWK 3/4 YTH Bearings, units and housings
Return to SKF bearing