| Housing material | Cast iron | |||


| d | 42.862 | mm | |
| A | 49 | mm | |
| A1 | 17.5 | mm | |
| A2 | 35 | mm | |
| A5 | 23 | mm | |
| B | 49.2 | mm | |
| H | 117 | mm | |
| H1 | 101 | mm | |
| H2 | 83 | mm | |
| L | 144 | mm | |
| L1 | 87 | mm | |
| L2 | 15 | mm | |
| L3 | 83 | mm | |
| N | 29 | mm | |
| N1 | 19 | mm | |
| N2 | 49 | mm | |
| s1 | 30.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 4.5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 33.2 | kN | |
| Basic static load rating | C0 | 21.6 | kN | |
| Fatigue load limit | Pu | 0.915 | kN | |
| Limiting speed with shaft tolerance h6 | 4300 | r/min |
| Mass bearing unit | 2.4 | kg |
| Grub (set) screw | G2 | 5/16-24 UNF | ||
| Hexagonal key size for grub screw | N | 3.969 | mm | |
| Recommended tightening torque for grub screw | 6.5 | N·m | ||
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1200 VA R | 1090 | - | - | Seals |
|---|---|---|---|---|
| 11191 | 28.575 | 46.43 | 6.35 | Seals |
| 313824 | 230 | 330 | - | Bearings, units and housings |
| 331978 BG | 540 | 690 | - | Bearings, units and housings |
| 35x50x8 HMSA10 V | 35 | 50 | 8 | Seals |
| 61815 | 75 | 95 | 10 | Bearings, units and housings |
| AOH 2252 G | 240 | 260 | 155 | Bearings, units and housings |
| AOH 30/630 | 600 | 630 | 258 | Bearings, units and housings |
| NJ 308 ECP | 40 | 90 | 23 | Bearings, units and housings |
| PPM 303430 | 30 | 34 | 30 | Bearings, units and housings |
| SAF 22317 | 85 | - | - | Bearings, units and housings |
| SAFS 23026 KATLC x 4.3/8 | 111.125 | - | - | Bearings, units and housings |
Hot number:
15041
231/1000 CAF/W33
36005
450 VRME R
52215
71914 ACB/P4A
90886
GB 3010
NCF 2984 V
NU 2218 ECM
NUP 328 ECM
PCZ 6476 E
QJ 205 N2MA
SIKAC 8 M
SYFWK 1. LTA
Previous:TU 1.1/8 TF Bearings, units and housings ---- Next:TU 1.15/16 TF Bearings, units and housings
Return to SKF bearing