Housing material | Cast iron |
d | 49.213 | mm | |
A | 49 | mm | |
A1 | 17.5 | mm | |
A2 | 36 | mm | |
A5 | 29.5 | mm | |
B | 51.6 | mm | |
H | 117 | mm | |
H1 | 101 | mm | |
H2 | 83 | mm | |
L | 149 | mm | |
L1 | 90 | mm | |
L2 | 16 | mm | |
L3 | 86 | mm | |
N | 29 | mm | |
N1 | 19 | mm | |
N2 | 49 | mm | |
s1 | 32.6 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 4 | mm | |
Ra | 30 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT |
Basic dynamic load rating | C | 35.1 | kN | |
Basic static load rating | C0 | 23.2 | kN | |
Fatigue load limit | Pu | 0.98 | kN | |
Limiting speed with shaft tolerance h6 | 4000 | r/min |
Mass bearing unit | 2.45 | kg |
Grub (set) screw | G2 | 3/8-24 UNF | ||
Hexagonal key size for grub screw | N | 4.763 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1425 VRME R | 1350 | - | - | Seals |
---|---|---|---|---|
24988 | 63.5 | 88.9 | 11.13 | Seals |
6202/HC5C3 | 15 | 35 | 11 | Bearings, units and housings |
6935 | 17.4752 | 38.07 | 6.35 | Seals |
7012 CD/P4AL | 60 | 95 | 18 | Bearings, units and housings |
7202 BEGAP | 15 | 35 | 11 | Bearings, units and housings |
81218 TN | 90 | 135 | 35 | Bearings, units and housings |
AOHX 30/600 | 570 | 600 | 245 | Bearings, units and housings |
FYR 3 1/2-18 | 88.9 | - | - | Bearings, units and housings |
HK 4020 | 40 | 47 | 20 | Bearings, units and housings |
N 314 ECP | 70 | 150 | 35 | Bearings, units and housings |
NJ 28/530 ECMA | 530 | 650 | 72 | Bearings, units and housings |
Hot number:
10x26x7 HMSA10 V
24160-2CS5/VT143
BD-22248 CCK/W33-OH 3148 H
24372
32240
420x460x20 HS7 R
53418 M + U 418
6206-RSH
6383
90x110x10 HMS5 V
BD-C 30/530 KM-AOH 30/530
NCF 2930 CV
PBM 142012 M1G1
SIL 35 ES-2RS
W 61810
Previous:TU 1.11/16 TF Bearings, units and housings ---- Next:TU 1.3/16 TF Bearings, units and housings
Return to SKF bearing