Housing material | Cast iron |
d | 30.163 | mm | |
A | 37 | mm | |
A1 | 13.5 | mm | |
A2 | 28 | mm | |
A5 | 20 | mm | |
B | 38.1 | mm | |
H | 104 | mm | |
H1 | 89 | mm | |
H2 | 56 | mm | |
L | 114 | mm | |
L1 | 70 | mm | |
L2 | 10 | mm | |
L3 | 57 | mm | |
N | 22 | mm | |
N1 | 16 | mm | |
N2 | 37 | mm | |
s1 | 22.2 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3.5 | mm | |
Ra | 30 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT |
Basic dynamic load rating | C | 19.5 | kN | |
Basic static load rating | C0 | 11.2 | kN | |
Fatigue load limit | Pu | 0.475 | kN | |
Limiting speed with shaft tolerance h6 | 6300 | r/min |
Mass bearing unit | 1.25 | kg |
Grub (set) screw | G2 | 1/4-28 UNF | ||
Hexagonal key size for grub screw | N | 3.175 | mm | |
Recommended tightening torque for grub screw | 4 | N·m |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1575 VRME R | 1495 | - | - | Seals |
---|---|---|---|---|
23260 CC/W33 | 300 | 540 | 192 | Bearings, units and housings |
50x72x8 CRW1 R | 50 | 72 | 8 | Seals |
50x72x8 HMSA10 RG | 50 | 72 | 8 | Seals |
68x95x10 CRW1 R | 68 | 95 | 10 | Seals |
71816 CD/P4 | 80 | 100 | 10 | Bearings, units and housings |
71902 ACE/P4AH | 15 | 28 | 7 | Bearings, units and housings |
AOH 240/850 G | 800 | 850 | 415 | Bearings, units and housings |
NNU 41/750 K30M/W33 | 750 | 1220 | 475 | Bearings, units and housings |
SNL 4088 G | 440 | - | - | Bearings, units and housings |
SY 2.15/16 TF/VA228 | 74.613 | - | - | Bearings, units and housings |
W 617/3 R | 3 | 6 | 2 | Bearings, units and housings |
Hot number:
130x150x14 CRSA1 R
13568
597448
6209-2Z
7007 ACD/P4AH
7213 BECBM
7315 BECBP
FYTBK 30 TD
MS 30/500-96
NJ 1076 MA
OKBS 82
PCM 040504 E/VB055
PCM 283230 M
S7020 ACE/HCP4A
SAF 22507 x 1.1/8 T
Previous:TU 1.15/16 TF Bearings, units and housings ---- Next:TU 1.3/4 TF Bearings, units and housings
Return to SKF bearing