Housing material | Cast iron |
d | 36.512 | mm | |
A | 37 | mm | |
A1 | 13.5 | mm | |
A2 | 30 | mm | |
A5 | 22 | mm | |
B | 42.9 | mm | |
H | 103 | mm | |
H1 | 89 | mm | |
H2 | 64 | mm | |
L | 129 | mm | |
L1 | 78 | mm | |
L2 | 12 | mm | |
L3 | 64 | mm | |
N | 22 | mm | |
N1 | 17 | mm | |
N2 | 38 | mm | |
s1 | 25.4 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3.5 | mm | |
Ra | 30 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed with shaft tolerance h6 | 5300 | r/min |
Mass bearing unit | 1.5 | kg |
Grub (set) screw | G2 | 5/16-24 UNF | ||
Hexagonal key size for grub screw | N | 3.969 | mm | |
Recommended tightening torque for grub screw | 6.5 | N·m |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
361844 | 800 | 1080 | 115 | Bearings, units and housings |
---|---|---|---|---|
58x90x8 CRW1 R | 58 | 90 | 8 | Seals |
62201-2RS1 | 12 | 32 | 14 | Bearings, units and housings |
71816 ACD/HCP4 | 80 | 100 | 10 | Bearings, units and housings |
75 VA R | 67 | - | - | Seals |
FSAF 1520 x 3.1/2 | 88.9 | - | - | Bearings, units and housings |
NJ 215 ECP | 75 | 130 | 25 | Bearings, units and housings |
NU 315 ECP/VL0241 | 75 | 160 | 37 | Bearings, units and housings |
NUP 318 ECML | 90 | 190 | 43 | Bearings, units and housings |
SAF 22624 x 4.1/4 T | 107.95 | - | - | Bearings, units and housings |
SHR 120 | 120 | - | - | Coupling systems |
YAR 205-2RFGR/HV | 25 | 52 | 34.1 | Bearings, units and housings |
Hot number:
307352
55x75x10 HMS5 RG
7019 CD/P4AL
71920 CB/HCP4A
99284
FYRP 1 11/16
K 81234 M
NU 29/500 ECMA
PBM 7590140 M1G1
PSM 040708 A51
PSM 223220 A51
RNU 308 ECJ
SNL 524 TURU
SSAFS 22520 TLC
W 6208-2RZ
Previous:TU 1.5/16 TF Bearings, units and housings ---- Next:TU 13/16 TF Bearings, units and housings
Return to SKF bearing