| Housing material | Cast iron | |||


| d | 25.4 | mm | |
| A | 34 | mm | |
| A1 | 13.5 | mm | |
| A2 | 25 | mm | |
| A5 | 18 | mm | |
| B | 34.1 | mm | |
| H | 91 | mm | |
| H1 | 76 | mm | |
| H2 | 53 | mm | |
| L | 100 | mm | |
| L1 | 64 | mm | |
| L2 | 10 | mm | |
| L3 | 52 | mm | |
| N | 19 | mm | |
| N1 | 16 | mm | |
| N2 | 33 | mm | |
| s1 | 19.8 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed with shaft tolerance h6 | 7000 | r/min |
| Mass bearing unit | 0.86 | kg |
| Grub (set) screw | G2 | 1/4-28 UNF | ||
| Hexagonal key size for grub screw | N | 3.175 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 30314T84/DB | 70 | 150 | - | Bearings, units and housings |
|---|---|---|---|---|
| 8690 | 22.225 | 36.5 | 6.35 | Seals |
| BT2B 332167 C/HA3 | 400 | 650 | - | Bearings, units and housings |
| H 317 | 75 | 110 | 63 | Bearings, units and housings |
| HM 31/600 | 85 | - | 600 | Bearings, units and housings |
| IR 55x65x28 | 55 | 65 | 28 | Bearings, units and housings |
| NUP 2211 ECJ | 55 | 100 | 25 | Bearings, units and housings |
| PCZ 3636 E | 57.15 | 61.9125 | 57.15 | Bearings, units and housings |
| SSAFS 23056 KA x 10.7/16 | 265.1125 | - | - | Bearings, units and housings |
| W 6006 | 30 | 55 | 13 | Bearings, units and housings |
| YAR 207-2RF | 35 | 72 | 42.9 | Bearings, units and housings |
| YAR 208-108-2FW/VA201 | 38.1 | 80 | 49.2 | Bearings, units and housings |
Hot number:
20525
22324 CCJA/W33VA406
2319 KM + H 2319
3315 A-2Z
50x64x6 HMS5 RG
51248 M
6201/HR11TN
NU 1036 M
NCF 2956 CV
NJ 218 ECJ
NU 3092 ECMA
OKF 530
RNAO 18x30x24
SAF 1615 x 2.3/8 TLC
W 61813-2RS1
Previous:T7FC 085 Bearings, units and housings ---- Next:TU 1.1/16 TF Bearings, units and housings
Return to SKF bearing