| Housing material | Cast iron | |||


| d | 20.638 | mm | |
| A | 34 | mm | |
| A1 | 13.5 | mm | |
| A2 | 25 | mm | |
| A5 | 18 | mm | |
| B | 34.1 | mm | |
| H | 91 | mm | |
| H1 | 76 | mm | |
| H2 | 53 | mm | |
| L | 100 | mm | |
| L1 | 64 | mm | |
| L2 | 10 | mm | |
| L3 | 52 | mm | |
| N | 19 | mm | |
| N1 | 16 | mm | |
| N2 | 33 | mm | |
| s1 | 19.8 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed with shaft tolerance h6 | 7000 | r/min |
| Mass bearing unit | 0.88 | kg |
| Grub (set) screw | G2 | 1/4-28 UNF | ||
| Hexagonal key size for grub screw | N | 3.175 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | ||||
| Bearing |
YAR 205-013-2F
|
|||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 23156 CC/W33 | 280 | 460 | 146 | Bearings, units and housings |
|---|---|---|---|---|
| 40x58x7 HMSA10 RG | 40 | 58 | 7 | Seals |
| 7303 BEGAP | 17 | 47 | 14 | Bearings, units and housings |
| 99055 | 14 | 19.05 | 9.9314 | Seals |
| FY 1.1/4 LDW | 31.75 | - | - | Bearings, units and housings |
| FY 7/8 FM | 22.225 | - | - | Bearings, units and housings |
| GEP 160 FS | 160 | 230 | 115 | Bearings, units and housings |
| HE 316 | 69.85 | 80 | 59 | Bearings, units and housings |
| HK 2524.2RS | 25 | 32 | 24 | Bearings, units and housings |
| KMFE 10 | 14 | - | 50 | Bearings, units and housings |
| SAF 1507 x 1.1/8 | 28.575 | - | - | Bearings, units and housings |
| SAFS 22236 T | 180 | - | - | Bearings, units and housings |
Hot number:
25190
319428 DA-2LS
500 VA V
71910 CB/HCP4A
71920 CD/P4AH1
71956 CD/P4A
99134
FYWK 1.1/4 YTA
HJ 2224 EC
N 072
NKX 35
SAFS 22222
SAFS 22518 x 3.1/16 TLC
W 635-2RS1
WS 81213
Previous:TU 1.7/16 TF Bearings, units and housings ---- Next:TU 15/16 TF Bearings, units and housings
Return to SKF bearing