| Housing material | Cast iron | |||


| d | 23.812 | mm | |
| A | 34 | mm | |
| A1 | 13.5 | mm | |
| A2 | 25 | mm | |
| A5 | 18 | mm | |
| B | 34.1 | mm | |
| H | 91 | mm | |
| H1 | 76 | mm | |
| H2 | 53 | mm | |
| L | 100 | mm | |
| L1 | 64 | mm | |
| L2 | 10 | mm | |
| L3 | 52 | mm | |
| N | 19 | mm | |
| N1 | 16 | mm | |
| N2 | 33 | mm | |
| s1 | 19.8 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed with shaft tolerance h6 | 7000 | r/min |
| Mass bearing unit | 0.88 | kg |
| Grub (set) screw | G2 | 1/4-28 UNF | ||
| Hexagonal key size for grub screw | N | 3.175 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 331445 | 415.925 | 590.55 | - | Bearings, units and housings |
|---|---|---|---|---|
| 32320 | 100 | 215 | 77.5 | Bearings, units and housings |
| 401302 | 117 | - | - | Seals |
| 546966 | 12.7 | 31.75 | 6.35 | Seals |
| 6205/HR11QN | 25 | 52 | 15 | Bearings, units and housings |
| 6215-2Z/VA201 | 75 | 130 | 25 | Bearings, units and housings |
| MVR1-35 | 35 | 52 | - | Seals |
| K 89422 M | 110 | 230 | Bearings, units and housings | |
| MS 31/600-560 | - | - | 45 | Bearings, units and housings |
| NA 4856 | 280 | 350 | 69 | Bearings, units and housings |
| SAW 23532 x 5.1/2 TLC | 139.7 | - | - | Bearings, units and housings |
| SYF 30 FM | 30 | - | - | Bearings, units and housings |
Hot number:
1319
17488
32x52x8 HMS5 V
99108
BSA 306 C
C 3172 KM
FSYE 3 7/16-18
K 105x112x21
NKXR 30 Z
NU 211 ECM/HC5C3
OKBS 113
PRM 161815
SAF 22524 x 4.1/4
SAF 22532 x 5.3/8
Z 307 F
Previous:TU 13/16 TF Bearings, units and housings ---- Next:TU 2. TF Bearings, units and housings
Return to SKF bearing