Housing material | Cast iron |
d | 23.812 | mm | |
A | 34 | mm | |
A1 | 13.5 | mm | |
A2 | 25 | mm | |
A5 | 18 | mm | |
B | 34.1 | mm | |
H | 91 | mm | |
H1 | 76 | mm | |
H2 | 53 | mm | |
L | 100 | mm | |
L1 | 64 | mm | |
L2 | 10 | mm | |
L3 | 52 | mm | |
N | 19 | mm | |
N1 | 16 | mm | |
N2 | 33 | mm | |
s1 | 19.8 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 2 | mm | |
Ra | 30 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT |
Basic dynamic load rating | C | 14 | kN | |
Basic static load rating | C0 | 7.8 | kN | |
Fatigue load limit | Pu | 0.335 | kN | |
Limiting speed with shaft tolerance h6 | 7000 | r/min |
Mass bearing unit | 0.88 | kg |
Grub (set) screw | G2 | 1/4-28 UNF | ||
Hexagonal key size for grub screw | N | 3.175 | mm | |
Recommended tightening torque for grub screw | 4 | N·m |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16052 | 260 | 400 | 44 | Bearings, units and housings |
---|---|---|---|---|
17038 | 42.8752 | 79.38 | 9.53 | Seals |
450 VL V | 405 | - | - | Seals |
4913 | 12.7 | 19.02 | 3.18 | Seals |
718/850 AMB | 850 | 1030 | 82 | Bearings, units and housings |
7210 BECBP | 50 | 90 | 20 | Bearings, units and housings |
91327 | - | - | 30 | Seals |
950x1006x20 HDS2 R | 950 | 1006 | 20 | Seals |
BTM 180 AM/P4CDB | 180 | 280 | 90 | Bearings, units and housings |
FY 1.7/16 WDW | 36.513 | - | - | Bearings, units and housings |
FYTJ 35 TF | 35 | - | - | Bearings, units and housings |
SAF 22516 x 2.5/8 TLC | 66.675 | - | - | Bearings, units and housings |
Hot number:
23168-2CS5/VT143
19839
608/HR22Q2
60x82x12 HMSA10 V
71948 ACD/HCP4A
80x100x10 HMS5 RG
9681
NJ 406
OH 39/670 H
RN-4x25.8 BF/G2
SAFS 22524 TLC
SIR 80 ES
SNP 3184x15.3/4
SSAFS 22538 x 6.13/16
W 61901-2RS1
Previous:TU 13/16 TF Bearings, units and housings ---- Next:TU 2. TF Bearings, units and housings
Return to SKF bearing