| Housing material | Cast iron | |||


| d | 50.8 | mm | |
| A | 64 | mm | |
| A1 | 27 | mm | |
| A2 | 41 | mm | |
| A5 | 34 | mm | |
| B | 55.6 | mm | |
| H | 146 | mm | |
| H1 | 130 | mm | |
| H2 | 102 | mm | |
| L | 171 | mm | |
| L1 | 106 | mm | |
| L2 | 19 | mm | |
| L3 | 95 | mm | |
| N | 35 | mm | |
| N1 | 25 | mm | |
| N2 | 64 | mm | |
| s1 | 33.4 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 43.6 | kN | |
| Basic static load rating | C0 | 29 | kN | |
| Fatigue load limit | Pu | 1.25 | kN | |
| Limiting speed with shaft tolerance h6 | 3600 | r/min |
| Mass bearing unit | 3.95 | kg |
| Grub (set) screw | G2 | 3/8-24 UNF | ||
| Hexagonal key size for grub screw | N | 4.763 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 300x360x25 HDS2 V | 300 | 360 | 25 | Seals |
|---|---|---|---|---|
| 32014 X | 70 | 110 | 25 | Bearings, units and housings |
| 53315 + U 315 | 75 | 135 | 48.1 | Bearings, units and housings |
| 6300-2RSL | 10 | 35 | 11 | Bearings, units and housings |
| 7207 CD/P4A | 35 | 72 | 17 | Bearings, units and housings |
| C 2230 K | 150 | 270 | 73 | Bearings, units and housings |
| K 55x63x20 | 55 | 63 | 20 | Bearings, units and housings |
| KML 34 | 26 | - | 170 | Bearings, units and housings |
| MB 29 | 145 | 202 | - | Bearings, units and housings |
| NATR 15 | 15 | 35 | 18 | Bearings, units and housings |
| QJ 234 N2MA | 170 | 310 | 52 | Bearings, units and housings |
| SAW 23226 | 130 | - | - | Bearings, units and housings |
Hot number:
310x350x18 HDS2 V
402206
404853
406004
511/1180 F
6010-2Z
619/630 N1MA
71913 ACE/P4AH1
FSAF 1220 T
TQO design
H 3034 E
K 10x13x13 TN
SAF 1515 x 2.3/8 TLC
SNW 34x5.13/16
SYR 2 3/4 N-118
Previous:TU 15/16 TF Bearings, units and housings ---- Next:TU 2.3/16 TF Bearings, units and housings
Return to SKF bearing