| Housing material | Cast iron | |||


| d | 20 | mm | |
| A | 34 | mm | |
| A1 | 13.5 | mm | |
| A2 | 25 | mm | |
| A5 | 18.5 | mm | |
| B | 21.5 | mm | |
| H | 92 | mm | |
| H1 | 76 | mm | |
| H2 | 54 | mm | |
| L | 97 | mm | |
| L1 | 62 | mm | |
| L2 | 10 | mm | |
| L3 | 54 | mm | |
| N | 19 | mm | |
| N1 | 16 | mm | |
| N2 | 32 | mm | |
| s1 | 24 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2.5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 12.7 | kN | |
| Basic static load rating | C0 | 6.55 | kN | |
| Fatigue load limit | Pu | 0.28 | kN | |
| Limiting speed with shaft tolerance h6 | 8500 | r/min |
| Mass bearing unit | 0.92 | kg |
| Grub (set) screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 18039 | 46.0502 | 61.9 | 7.95 | Seals |
|---|---|---|---|---|
| 24892 CAMA/W20 | 460 | 580 | 118 | Bearings, units and housings |
| 7623 | 19.05 | 41.25 | 6.35 | Seals |
| 80x140x12 CRW1 R | 80 | 140 | 12 | Seals |
| FYK 40 TF | 40 | - | - | Bearings, units and housings |
| GEZM 208 ES-2LS | 63.5 | 100.013 | 95.25 | Bearings, units and housings |
| NNC 4916 CV | 80 | 110 | 30 | Bearings, units and housings |
| NU 2316 ECM | 80 | 170 | 58 | Bearings, units and housings |
| OH 3992 H | 430 | 460 | 189 | Bearings, units and housings |
| PCM 121425 M | 12 | 14 | 25 | Bearings, units and housings |
| SCF 90 ES | 90 | - | 60 | Bearings, units and housings |
| SILR 35 ES | 35 | - | 25 | Bearings, units and housings |
Hot number:
20x47x10 HMSA10 RG
315800 B
3219 A
61922 MA
7000 ACE/HCP4A
7221 BEP
D/W R2-2Z
GAC 30 F
H 311 E
NKI 75/25
NU 1012 M/HC5C3
NU 3184 ECMA
SYR 1 7/16
SIR 80 ES
SY 1.1/2 WDW
Previous:TU 2.3/16 TF Bearings, units and housings ---- Next:TU 25 FM Bearings, units and housings
Return to SKF bearing