| Housing material | Cast iron | |||


| d | 25 | mm | |
| A | 34 | mm | |
| A1 | 13.5 | mm | |
| A2 | 25 | mm | |
| A5 | 18 | mm | |
| B | 21.5 | mm | |
| H | 91 | mm | |
| H1 | 76 | mm | |
| H2 | 53 | mm | |
| L | 100 | mm | |
| L1 | 64 | mm | |
| L2 | 10 | mm | |
| L3 | 52 | mm | |
| N | 19 | mm | |
| N1 | 16 | mm | |
| N2 | 33 | mm | |
| s1 | 23.5 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed with shaft tolerance h6 | 7000 | r/min |
| Mass bearing unit | 0.85 | kg |
| Grub (set) screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 32x47x6 HMS5 RG | 32 | 47 | 6 | Seals |
|---|---|---|---|---|
| 54000 | 137.16 | 177.546 | - | Seals |
| 67982/67919 | 199.949 | 279.4 | 46.038 | Bearings, units and housings |
| C 3984 M | 420 | 560 | 106 | Bearings, units and housings |
| K 89426 M | 130 | 270 | Bearings, units and housings | |
| KMTA 5 | 20 | - | 25 | Bearings, units and housings |
| PBM 284050 M1G1 | 28 | 40 | 50 | Bearings, units and housings |
| NU 1015 M/HC5C3 | 75 | 115 | 20 | Bearings, units and housings |
| PCM 140145100 E | 140 | 145 | 100 | Bearings, units and housings |
| SAF 1517 x 2.13/16 T | 71.4375 | - | - | Bearings, units and housings |
| SAF 22528 x 5 TLC | 127 | - | - | Bearings, units and housings |
| W 63805-2RZ | 25 | 37 | 10 | Bearings, units and housings |
Hot number:
15677
23292 CA/W33
23936 CC/W33
249/950 CA/W33
34336
407256
6307/HR11TN
90896
99298
ECW 205
GE 90 ES/C2
NJ 2309 ECP
NU 18/1000 MA/HB1
PCM 303425 E
SNL 3160 TURT
Previous:TU 20 FM Bearings, units and housings ---- Next:TU 25 TF Bearings, units and housings
Return to SKF bearing