| Housing material | Cast iron | |||


| d | 35 | mm | |
| A | 37 | mm | |
| A1 | 13.5 | mm | |
| A2 | 30 | mm | |
| A5 | 22 | mm | |
| B | 25.4 | mm | |
| H | 103 | mm | |
| H1 | 89 | mm | |
| H2 | 64 | mm | |
| L | 129 | mm | |
| L1 | 78 | mm | |
| L2 | 12 | mm | |
| L3 | 64 | mm | |
| N | 22 | mm | |
| N1 | 17 | mm | |
| N2 | 38 | mm | |
| s1 | 29.4 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3.5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 25.5 | kN | |
| Basic static load rating | C0 | 15.3 | kN | |
| Fatigue load limit | Pu | 0.655 | kN | |
| Limiting speed with shaft tolerance h6 | 5300 | r/min |
| Mass bearing unit | 1.55 | kg |
| Grub (set) screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 230/500 CAK/W33 | 500 | 720 | 167 | Bearings, units and housings |
|---|---|---|---|---|
| 24263 | 61.9252 | 82.58 | 11.13 | Seals |
| 395 VRME R | 386 | - | - | Seals |
| 6009/HC5C3 | 45 | 75 | 16 | Bearings, units and housings |
| 99122 | 29.845 | 35.56 | 11.1252 | Seals |
| BT4B 334081/HA4 | 896.903 | 1264 | - | Bearings, units and housings |
| BD-C 3036 K-AH 3036 | 170 | 280 | 74 | Bearings, units and housings |
| HJ 1076 | 380 | 443 | 39.5 | Bearings, units and housings |
| MS 3192-88 | - | - | 36 | Bearings, units and housings |
| NU 2319 ECML | 95 | 200 | 67 | Bearings, units and housings |
| NX 15 Z | 15 | 24 | 28 | Bearings, units and housings |
| YEL 215-215-2F | 130 | Bearings, units and housings |
Hot number:
21069
22230-2CS5K/VT143
BD-23218 CCK/W33-H 2318
6002/HR11TN
61813
AN 20
AOH 3280 G
C 2318
BD-C 30/670 KM-AOH 30/670
NJ 212 ECML
NUB 210 ECP
RNA 6910
SAF 22522 TLC
W 38
W 63805
Previous:TU 30 TF Bearings, units and housings ---- Next:TU 35 TF Bearings, units and housings
Return to SKF bearing