| Housing material | Cast iron | |||


| d | 55 | mm | |
| A | 64 | mm | |
| A1 | 27 | mm | |
| A2 | 41 | mm | |
| A5 | 34 | mm | |
| B | 55.6 | mm | |
| H | 146 | mm | |
| H1 | 130 | mm | |
| H2 | 102 | mm | |
| L | 171 | mm | |
| L1 | 106 | mm | |
| L2 | 19 | mm | |
| L3 | 95 | mm | |
| N | 35 | mm | |
| N1 | 25 | mm | |
| N2 | 64 | mm | |
| s1 | 33.4 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 43.6 | kN | |
| Basic static load rating | C0 | 29 | kN | |
| Fatigue load limit | Pu | 1.25 | kN | |
| Limiting speed with shaft tolerance h6 | 3600 | r/min |
| Mass bearing unit | 3.8 | kg |
| Grub (set) screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 2307 EKM | 35 | 80 | 31 | Bearings, units and housings |
|---|---|---|---|---|
| 305269 D | 280 | 389.5 | 92 | Bearings, units and housings |
| 404504 | 405 | - | - | Seals |
| 414500 | 1315 | - | - | Seals |
| 47378 | 120.65 | 136.53 | 7.95 | Seals |
| 7021 ACD/P4AL | 105 | 160 | 26 | Bearings, units and housings |
| 87530 | - | - | 34.925 | Seals |
| GE 40 CJ2 | 40 | 62 | 28 | Bearings, units and housings |
| NCF 28/750 V | 750 | 920 | 100 | Bearings, units and housings |
| NKI 42/30 | 42 | 57 | 30 | Bearings, units and housings |
| SAFS 22534 x 5.7/8 | 149.225 | - | - | Bearings, units and housings |
| SY 1.3/16 TF | 30.163 | - | - | Bearings, units and housings |
Hot number:
380x425x20 HDS2 R
541974
6009/HR22T2
597356
6209-2ZNR
85x100x10 HMS5 RG
9604
FYRP 3 1/2
NU 1012 ECP
PCM 8085100 M
SAF 1509-210
SAW 23524 x 4.1/8
SY 30 LF
TU 1.3/8 TF
WBB1-8705-2RZ
Previous:TU 55 FM Bearings, units and housings ---- Next:TU 7/8 TF Bearings, units and housings
Return to SKF bearing