| Housing material | Cast iron | |||


| d | 20 | mm | |
| A | 34 | mm | |
| A1 | 12 | mm | |
| A2 | 25 | mm | |
| B | 31 | mm | |
| H | 92 | mm | |
| H1 | 76 | mm | |
| H2 | 54 | mm | |
| L | 97 | mm | |
| L1 | 62 | mm | |
| L2 | 10 | mm | |
| L3 | 54 | mm | |
| N | 19 | mm | |
| N1 | 16 | mm | |
| N2 | 32 | mm | |
| s1 | 18.3 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2.5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 12.7 | kN | |
| Basic static load rating | C0 | 6.55 | kN | |
| Fatigue load limit | Pu | 0.28 | kN | |
| Limiting speed with shaft tolerance h6 | 8500 | r/min |
| Mass bearing unit | 0.89 | kg |
| Grub (set) screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 11067 | 28.575 | 39.65 | 6.35 | Seals |
|---|---|---|---|---|
| 14x25x5 HMS5 V | 14 | 25 | 5 | Seals |
| 1750 VL R | 1585 | - | - | Seals |
| 2600330 | 660.4 | 701.68 | 19.05 | Seals |
| 3687 | 9.525 | 19.02 | 6.35 | Seals |
| 626/HR22Q2 | 6 | 19 | 6 | Bearings, units and housings |
| 7034 ACD/HCP4AL | 170 | 260 | 42 | Bearings, units and housings |
| 71824 CD/P4 | 120 | 150 | 16 | Bearings, units and housings |
| BSA 204 C | 20 | 47 | 14 | Bearings, units and housings |
| FYK 40 TF | 40 | - | - | Bearings, units and housings |
| PCM 455030 M | 45 | 50 | 30 | Bearings, units and housings |
| PCM 808560 E | 80 | 85 | 60 | Bearings, units and housings |
Hot number:
12x25x7 CRW1 R
180x200x12 CRS1 R
BD-22210 EK-H 310
280x310x16 HS8 R
31511
4940
71913 ACB/P4A
71920 ACD/P4AL
7207 ACD/HCP4A
NJ 2208 ECP
NX 17 Z
SAW 23534 x 6 T
SNL 30/530
SNW 36x6.5/16
W 619/1 R
Previous:TU 7/8 TF Bearings, units and housings ---- Next:TUJ 25 TF Bearings, units and housings
Return to SKF bearing