| Housing material | Cast iron | |||


| d | 30 | mm | |
| A | 37 | mm | |
| A1 | 12 | mm | |
| A2 | 28 | mm | |
| B | 38.1 | mm | |
| H | 104 | mm | |
| H1 | 89 | mm | |
| H2 | 56 | mm | |
| L | 114 | mm | |
| L1 | 70 | mm | |
| L2 | 10 | mm | |
| L3 | 57 | mm | |
| N | 22 | mm | |
| N1 | 16 | mm | |
| N2 | 37 | mm | |
| s1 | 22.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3.5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 19.5 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Limiting speed with shaft tolerance h6 | 6300 | r/min |
| Mass bearing unit | 1.2 | kg |
| Grub (set) screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 10x25x7 HMS5 V | 10 | 25 | 7 | Seals |
|---|---|---|---|---|
| 29952 | 76.2 | 101.68 | 11.13 | Seals |
| 410x450x20 HDS2 R | 410 | 450 | 20 | Seals |
| 48x68x10 HMSA10 RG | 48 | 68 | 10 | Seals |
| 6391 | 15.875 | 34.98 | 6.35 | Seals |
| 7213 BECBP | 65 | 120 | 23 | Bearings, units and housings |
| FY 1.1/4 TF/VA228 | 31.75 | - | 46.4 | Bearings, units and housings |
| FY 2. FM | 50.8 | - | - | Bearings, units and housings |
| FY 55 LF | 55 | - | - | Bearings, units and housings |
| NUP 212 ECJ | 60 | 110 | 22 | Bearings, units and housings |
| PCMW 527802 M | 52 | 78 | - | Bearings, units and housings |
| W 628/8 R-2Z | 8 | 16 | 5 | Bearings, units and housings |
Hot number:
124020
15655
23256 CC/W33
5750558
8649
7016 ACD/P4AL
99595
MB 7
NU 215 ECML
OKC 570
SAFS 22518-11 x 3.1/4 TLC
SAFS 23028 KA x 4.13/16
SY 20 WDW
TUWK 1.1/4 ALTA
YAR 210-112-2F
Previous:TUJ 25 TF Bearings, units and housings ---- Next:TUJ 35 TF Bearings, units and housings
Return to SKF bearing