| Housing material | Cast iron | |||


| d | 45 | mm | |
| A | 49 | mm | |
| A1 | 16 | mm | |
| A2 | 35 | mm | |
| B | 49.2 | mm | |
| H | 117 | mm | |
| H1 | 102 | mm | |
| H2 | 83 | mm | |
| L | 144 | mm | |
| L1 | 87 | mm | |
| L2 | 15 | mm | |
| L3 | 83 | mm | |
| N | 29 | mm | |
| N1 | 19 | mm | |
| N2 | 49 | mm | |
| s1 | 30.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 4.5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 33.2 | kN | |
| Basic static load rating | C0 | 21.6 | kN | |
| Fatigue load limit | Pu | 0.915 | kN | |
| Limiting speed with shaft tolerance h6 | 4300 | r/min |
| Mass bearing unit | 2.25 | kg |
| Grub (set) screw | G2 | M8x1 | ||
| Hexagonal key size for grub screw | N | 4 | mm | |
| Recommended tightening torque for grub screw | 6.5 | N·m | ||
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 25x38x7 HMSA10 V | 25 | 38 | 7 | Seals |
|---|---|---|---|---|
| 265x305x18 HDS1 R | 265 | 305 | 18 | Seals |
| 35x55x7 HMS5 V | 35 | 55 | 7 | Seals |
| 34116 | 88.011 | 108.0008 | 11.5062 | Seals |
| 626 | 6 | 19 | 6 | Bearings, units and housings |
| 7420 CBM | 100 | 265 | 60 | Bearings, units and housings |
| 99180 | 44.45 | 52.4002 | 15.875 | Seals |
| KMFE 10 | 14 | - | 50 | Bearings, units and housings |
| NNCF 4856 CV | 280 | 350 | 69 | Bearings, units and housings |
| PCM 11512070 M | 115 | 120 | 70 | Bearings, units and housings |
| S71917 CE/HCP4A | 85 | 120 | 18 | Bearings, units and housings |
| SAF 1509 | 36.5125 | - | - | Bearings, units and housings |
Hot number:
18666
305701 C-2Z
3211 A
60x80x8 HMS5 RG
7022 ACE/HCP4AL
7080 AM
7305 BEY
TQO design
GE 140 ES-2LS
NU 208 ECKP
NUTR 4090 A
RNA 4906 RS
S71918 CE/P4A
SAF 1220 TLC
SAFS 23048 KAT x 8.1/2
Previous:TUJ 40 TF Bearings, units and housings ---- Next:TUJ 50 TF Bearings, units and housings
Return to SKF bearing