| Housing material | Cast iron | |||


| d | 50 | mm | |
| A | 49 | mm | |
| A1 | 16 | mm | |
| A2 | 36 | mm | |
| B | 51.6 | mm | |
| H | 117 | mm | |
| H1 | 102 | mm | |
| H2 | 83 | mm | |
| L | 149 | mm | |
| L1 | 90 | mm | |
| L2 | 16 | mm | |
| L3 | 86 | mm | |
| N | 29 | mm | |
| N1 | 19 | mm | |
| N2 | 49 | mm | |
| s1 | 32.6 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 4 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 35.1 | kN | |
| Basic static load rating | C0 | 23.2 | kN | |
| Fatigue load limit | Pu | 0.98 | kN | |
| Limiting speed with shaft tolerance h6 | 4000 | r/min |
| Mass bearing unit | 2.35 | kg |
| Grub (set) screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 29326 E | 130 | 225 | 58 | Bearings, units and housings |
|---|---|---|---|---|
| 331092 A | 347.662 | 469.9 | - | Bearings, units and housings |
| 470336 | 328 | - | - | Seals |
| 91366 | - | - | 25 | Seals |
| 91385 | - | - | 36 | Seals |
| BT2B 332767 A | 101.6 | 146.05 | - | Bearings, units and housings |
| D/W R1-5-2Z | 2.38 | 7.938 | 3.571 | Bearings, units and housings |
| IR 65x75x28 EGS | 65 | 75 | 28 | Seals |
| K 50x58x25 | 50 | 58 | 25 | Bearings, units and housings |
| MB 2 A | 15 | 28 | - | Bearings, units and housings |
| PCM 808580 M | 80 | 85 | 80 | Bearings, units and housings |
| W 63803 | 17 | 26 | 7 | Bearings, units and housings |
Hot number:
11422
17435
23260 CCK/W33
330x370x18 HDS2 V
71820 ACD/P4
850 VA R
99299
BT2B 334032/HA4
FSE 513-611
GEM 40 ESX-2LS
NNU 41/710 M/W33
NUP 214 ECM
SIR 20 ES
SNL 519-616
YELAG 206
Previous:TUJ 45 TF Bearings, units and housings ---- Next:TUJ 504 Bearings, units and housings
Return to SKF bearing