da | 65 | mm | |
db | 77.787 | mm | |
dc | 61.913 | mm | |
Da | 140 | mm | |
Ca | 57.785 | mm | |
A1 | 88.9 | mm | |
A2 | 134.938 | mm | |
ba | 32.544 | mm | |
H | 167.481 | mm | |
H1 | 88.9 | mm | |
H2 | 31.75 | mm | |
J | min. | 244.475 | mm |
J | max. | 279.4 | mm |
J1 | 53.975 | mm | |
L | 330.2 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 53.181 | mm | |
R2 | 21.431 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 36.513 | mm |
End plug (suffix Y) |
EPR 7
|
Bearing limiting speed | 6000 | r/min |
P60° | 60.5 | kN | |
P90° | 36 | kN | |
P120° | 21.8 | kN | |
P150° | 19.6 | kN | |
P180° | 23.1 | kN | |
Pa | 14.7 | kN |
Mass pillow block | 15.9 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 175.77 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
17341 | 44.45 | 62 | 6.35 | Seals |
---|---|---|---|---|
230/850 CAK/W33 | 850 | 1220 | 272 | Bearings, units and housings |
30x52x8 HMS5 V | 30 | 52 | 8 | Seals |
33024 | 120 | 180 | 48 | Bearings, units and housings |
471326 | 1259 | - | - | Seals |
91348 | - | - | 24.28 | Seals |
NA 4834 | 170 | 215 | 45 | Bearings, units and housings |
NKIB 5903 | 17 | 30 | 20 | Bearings, units and housings |
PSM 607250 A51 | 60 | 72 | 50 | Bearings, units and housings |
SAF 23026 KATLC x 4.5/16 | 112.7125 | - | - | Bearings, units and housings |
SAF 23028 KAT x 4.7/8 | 125.4125 | - | - | Bearings, units and housings |
SAFS 22526 x 4.5/16 TLC | 109.5375 | - | - | Bearings, units and housings |
Hot number:
10681
3304 A
629/HR22T2
7 VS V
BT2B 334013/HA1
BT4B 328727 G/HA1VA901
BT4B 332822/HA1
H 307
NA 4868
NJ 213 ECJ
NU 330 ECML
OKF 350
SI 20 C
SNW 38x6.7/8
YEL 210-115-2F
Previous:FSAF 1312 TLC Bearings, units and housings ---- Next:FSAF 1313 T Bearings, units and housings
Return to SKF bearing