da | 63.5 | mm | |
Da | 130 | mm | |
Ca | 37.008 | mm | |
A1 | 79.375 | mm | |
A2 | 118.666 | mm | |
ba | 30.163 | mm | |
H | 157.559 | mm | |
H1 | 82.55 | mm | |
H2 | 28.575 | mm | |
J | min. | 219.075 | mm |
J | max. | 244.475 | mm |
J1 | 47.625 | mm | |
L | 285.75 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 46.038 | mm | |
R2 | 21.431 | mm | |
RG | 1/4 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 31.75 | mm |
Housing |
FSAF 515
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-15-0
|
|||
Labyrinth ring |
2 x LOR 38
|
|||
PosiTrac Plus contact element |
2 x B10724-37
|
|||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for PosiTrac Plus seal | 2350 | r/min |
P60° | 54.3 | kN | |
P90° | 32.5 | kN | |
P120° | 20 | kN | |
P150° | 18.2 | kN | |
P180° | 22.2 | kN | |
Pa | 5.65 | kN |
Mass pillow block | 12.7 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 136.08 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
30220 | 100 | 180 | 37 | Bearings, units and housings |
---|---|---|---|---|
45 VS R | 40 | - | - | Seals |
495 VRME R | 483 | - | - | Seals |
531635 | 227.0252 | - | - | Seals |
71913 ACB/P4A | 65 | 90 | 13 | Bearings, units and housings |
80x115x12 HMS5 V | 80 | 115 | 12 | Seals |
87089 | - | - | 63.5 | Seals |
C 3140 K | 200 | 340 | 112 | Bearings, units and housings |
NU 313 ECPH | 65 | 140 | 33 | Bearings, units and housings |
PF 40 TR | 40 | - | - | Bearings, units and housings |
SYWR 1.3/8 YTHR | 34.925 | - | - | Bearings, units and housings |
SY 3/4 TF/VA228 | 19.05 | - | - | Bearings, units and housings |
Hot number:
10158
3307 A-2RS1TN9/MT33
38x52x8 HMSA10 V
471401
520x560x20 HDS1 V
6139
90841
90889
FY 1.1/4 WDW
H 213
HJ 244 EC
KRV 47 PPA
NU 10/530 MA
NU 1022 M
SAF 22618 x 3.1/8 TLC
Previous:FSAF 1515 x 2.1/2 Bearings, units and housings ---- Next:FSAF 1515 x 2.3/8 Bearings, units and housings
Return to SKF bearing