da | 88.9 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 222.25 | mm | |
ba | 38.894 | mm | |
H | 217.488 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
J1 | 60.325 | mm | |
L | 387.35 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing |
FSAF 520
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1520
|
|||
Taconite seal | TER 103 | |||
|
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 119 | kN | |
P90° | 71.2 | kN | |
P120° | 44.5 | kN | |
P150° | 40 | kN | |
P180° | 48.9 | kN | |
Pa | 10.2 | kN |
Mass pillow block | 28.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 365.71 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
23224-2CS5/VT143 | 120 | 215 | 76 | Bearings, units and housings |
---|---|---|---|---|
3621 | 9.525 | 14.3 | 2.39 | Seals |
52207 | 30 | 62 | 34 | Bearings, units and housings |
71922 CB/P4A | 110 | 150 | 20 | Bearings, units and housings |
8631 | 22.225 | 31.78 | 4.78 | Seals |
AS 90120 | 90 | 120 | 1 | Bearings, units and housings |
C 4026 V | 130 | 200 | 69 | Bearings, units and housings |
MS 31/710 | - | - | 55 | Bearings, units and housings |
OKCX 360 | 360 | - | ||
S71907 ACB/P4A | 35 | 55 | 10 | Bearings, units and housings |
SAF 22620 | 87.3125 | - | - | Bearings, units and housings |
SNW 109x1.7/16 | 36.5125 | 45 | 53.9242 | Bearings, units and housings |
Hot number:
10x22x7 HMSA10 V
210x245x16 HDS1 R
40x55x8 HMSA10 V
524599
54925
61876 MA
BT4-8009 G/HA1VA901
GB 4920
GEP 360 FS
K 20x30x30
K 89412 TN
NKI 45/25 TN
SAF 23036 KA x 6.7/16
SSAFS 23056 KAT x 9.15/16
XHCE 060/OK 170
Previous:FSAF 1520 x 3.1/2 Bearings, units and housings ---- Next:FSAF 1520 x 3.1/2 TLC Bearings, units and housings
Return to SKF bearing