da | 61.913 | mm | |
Da | 160 | mm | |
Ca | 64.795 | mm | |
A1 | 98.425 | mm | |
A2 | 223.838 | mm | |
ba | 35.719 | mm | |
H | 192.088 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.94 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 42.862 | mm |
Housing |
FSAF 615
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1615
|
|||
Taconite seal | TER 37 | |||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for Taconite seal | 1250 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 8.27 | kN |
Mass pillow block | 21.5 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 286.33 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
12364 | 31.75 | 44.5 | 6.35 | Seals |
---|---|---|---|---|
300x340x18 HDS1 V | 300 | 340 | 18 | Seals |
5 VS R | 4 | - | - | Seals |
6226-Z | 130 | 230 | 40 | Bearings, units and housings |
6314 N | 70 | 150 | 35 | Bearings, units and housings |
99452 | 115 | 127 | 23.8252 | Seals |
90x115x12 CRWA1 R | 90 | 115 | 12 | Seals |
FYTB 1.3/4 FM | 44.45 | - | - | Bearings, units and housings |
H 2340 | 180 | 200 | 176 | Bearings, units and housings |
NJ 2313 ECML | 65 | 140 | 48 | Bearings, units and housings |
SSAFS 22522 x 3.13/16 T | 96.8375 | - | - | Bearings, units and housings |
WS 81240 | 200 | 18 | Bearings, units and housings |
Hot number:
17x47x7 HMS5 V
20445
23976 CCK/W33
400704
71924 CD/P4AL
75x95x10 HMSA10 RG
91303
FYRP 2 3/16
NU 2217 ECM
OKBS 89
PCM 303415 E
QJ 316 N2MA
SAFS 22520-11 x 3.5/16
TUWK 1.1/4 ALTA
W 607 R
Previous:FSAF 1615 Bearings, units and housings ---- Next:FSAF 1615 TLC Bearings, units and housings
Return to SKF bearing