da | 60.325 | mm | |
Da | 160 | mm | |
Ca | 64.795 | mm | |
A1 | 98.425 | mm | |
ba | 35.719 | mm | |
H | 192.088 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.94 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 42.862 | mm |
Housing |
FSAF 615
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1615
|
|||
Taconite seal | TER 36 | |||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for Taconite seal | 1250 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 8.27 | kN |
Mass pillow block | 21.5 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 286.33 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
40036 | 101.6 | 136.55 | 11.13 | Seals |
---|---|---|---|---|
47583 | 120.65 | 158.75 | 12.7 | Seals |
50x62x7 HMS5 V | 50 | 62 | 7 | Seals |
53315 + U 315 | 75 | 135 | 48.1 | Bearings, units and housings |
95x170x13 HMS5 V | 95 | 170 | 13 | Seals |
G 14x22x3 | 14 | 22 | 3 | Seals |
GS 81113 | 65 | 90 | 5.25 | Bearings, units and housings |
KMT 22 | 32 | - | 110 | Bearings, units and housings |
M 88043/010 | 30.162 | 68.262 | 22.225 | Bearings, units and housings |
PBM 658090 M1G1 | 65 | 80 | 90 | Bearings, units and housings |
PCM 161825 E | 16 | 18 | 25 | Bearings, units and housings |
SAFS 22520-11 | 87.3125 | - | - | Bearings, units and housings |
Hot number:
1300585
1500 VL V
30360
32222/DF
524211
85x115x12 HMSA10 RG
BD-BS2-2218-2RSK/VT143-H 2318 E/L73
GEH 25 ESX-2LS
KMFE 7
PRM 505525
SAF 22328 T
YARAG 208-108
TUWK 507 L
W 639-2RS1
WS 89434
Previous:FSAF 1615 x 2.3/8 Bearings, units and housings ---- Next:FSAF 1615 x 2.3/8 TLC Bearings, units and housings
Return to SKF bearing