da | 60.325 | mm | |
Da | 160 | mm | |
Ca | 64.795 | mm | |
A1 | 98.425 | mm | |
ba | 35.719 | mm | |
H | 192.088 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.94 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 42.862 | mm |
Housing |
FSAF 615
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1615
|
|||
Taconite seal | TER 36 | |||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for Taconite seal | 1250 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 8.27 | kN |
Mass pillow block | 21.5 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 286.33 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
130x155x10 CRSH1 R | 130 | 155 | 10 | Seals |
---|---|---|---|---|
17404 | 44.45 | 65.05 | 7.95 | Seals |
471801 | 1671 | - | - | Seals |
71920 CE/P4AL | 100 | 140 | 20 | Bearings, units and housings |
LM 869448/410 | 431.8 | 571.5 | 74.612 | Bearings, units and housings |
NA 4905 RS | 25 | 42 | 17 | Bearings, units and housings |
NCF 2948 CV | 240 | 320 | 48 | Bearings, units and housings |
OH 3280 H | 380 | 400 | 328 | Bearings, units and housings |
PCM 9095100 M | 90 | 95 | 100 | Bearings, units and housings |
PCZ 5660 M | 88.9 | 93.6625 | 95.25 | Bearings, units and housings |
W 626-2RZ | 6 | 19 | 6 | Bearings, units and housings |
Z 010 | 50 | - | 6 | Seals |
Hot number:
12458
12x28x7 HMS5 RG
2000238
21763
22356 CC/W33
29368
6393
C 3048 K
GAC 40 F
K 62x70x40 ZW
KD21-554
PBM 120140140 M1G1
SAW 23518 x 3.1/8 TLC
SNW 144x7.1/2
YAR 220-2F
Previous:FSAF 1615 x 2.3/8 Bearings, units and housings ---- Next:FSAF 1615 x 2.3/8 TLC Bearings, units and housings
Return to SKF bearing