da | 85 | mm | |
db | 100.013 | mm | |
dc | 80.963 | mm | |
Da | 150 | mm | |
Ca | 45.796 | mm | |
A1 | 88.9 | mm | |
A2 | 198.438 | mm | |
S | 4.763 | mm | |
ba | 35.719 | mm | |
H | 182.166 | mm | |
H1 | 95.25 | mm | |
H2 | 31.75 | mm | |
J | min. | 250.825 | mm |
J | max. | 279.4 | mm |
J1 | 53.975 | mm | |
L | 330.2 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 53.975 | mm | |
R2 | 22.225 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
End plug (suffix Y) |
EPR 9
|
Max. speed for Taconite seal | 775 | r/min |
P60° | 61.4 | kN | |
P90° | 36.9 | kN | |
P120° | 23.1 | kN | |
P150° | 20.9 | kN | |
P180° | 25.4 | kN | |
Pa | 16.5 | kN |
Mass pillow block | 15.9 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 110.56 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
17x32x7 HMSA10 V | 17 | 32 | 7 | Seals |
---|---|---|---|---|
24916 | 63.5 | 82.58 | 11.13 | Seals |
30033 | 76.2 | 107.92 | 11.13 | Seals |
320 VE R | 314 | - | - | Seals |
401306 | 117 | - | - | Seals |
51107 V/HR11T1 | 35 | 52 | 12 | Bearings, units and housings |
6207/HR11TN | 35 | 72 | 17 | Bearings, units and housings |
708/500 AMB | 500 | 620 | 37 | Bearings, units and housings |
95620 | 242.8748 | 301.2186 | - | Seals |
GS 81104 | 20 | 35 | 2.75 | Bearings, units and housings |
HK 0910 | 9 | 13 | 10 | Bearings, units and housings |
NU 215 ECP | 75 | 130 | 25 | Bearings, units and housings |
Hot number:
18732
27539
33x45x7 HMSA10 V
7019 ACD/P4A
71913 CE/P4AH1
7405 BCBM
86000
FYNT 45 F
FYTBK 25 LF
HK 1015
NCF 2912 CV
NU 417
SAF 22522 x 3.13/16 T
W 61701 R-2RS1
WBB1-8709
Previous:FSAF 22217 Bearings, units and housings ---- Next:FSAF 22217 TLC Bearings, units and housings
Return to SKF bearing