da | 100 | mm | |
db | 114.3 | mm | |
dc | 96.838 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 155.575 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 217.488 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
J1 | 60.325 | mm | |
L | 387.35 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
End plug (suffix Y) |
EPR 15
|
Bearing limiting speed | 4500 | r/min |
P60° | 119 | kN | |
P90° | 71.2 | kN | |
P120° | 44.5 | kN | |
P150° | 40 | kN | |
P180° | 48.9 | kN | |
Pa | 31.6 | kN |
Mass pillow block | 27.5 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
10515 | 27 | 38.07 | 6.35 | Seals |
---|---|---|---|---|
BD-23092 CAK/W33-AOHX 3092 G | 440 | 680 | 163 | Bearings, units and housings |
25950 | 66.2178 | 85.09 | 9.53 | Seals |
63003-2RS1 | 17 | 35 | 14 | Bearings, units and housings |
6312-RS1 | 60 | 130 | 31 | Bearings, units and housings |
72x95x12 HMS5 V | 72 | 95 | 12 | Seals |
GEZ 412 ESL-2LS | 120.65 | 187.325 | 105.562 | Bearings, units and housings |
H 2308 | 35 | 58 | 46 | Bearings, units and housings |
IR 17x21x20 | 17 | 21 | 20 | Bearings, units and housings |
S71907 ACE/P4A | 35 | 55 | 10 | Bearings, units and housings |
SAW 23538 x 6.7/8 TLC | 174.625 | - | - | Bearings, units and housings |
Z 216 | 80 | - | 7 | Seals |
Hot number:
20x45x7 HMSA10 V
33210
770 VRME R
BA1B 307788
BC4-8029/HA4
ECL 204
KMFE 7 L
N 1012 KTNHA/SP
NNCL 4916 CV
NNF 5022 ADA-2LSV
NNF 5024 ADA-2LSV
NU 315 ECP/VL0241
PCM 353920 E
SAF 22620 x 3.3/8 T
SAL 70 ESX-2LS
Previous:FSAF 22218 TLC Bearings, units and housings ---- Next:FSAF 22220 T Bearings, units and housings
Return to SKF bearing