da | 100 | mm | |
db | 114.3 | mm | |
dc | 96.838 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 219.075 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 217.488 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 675 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 36 | kN |
Mass pillow block | 27.5 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 365.71 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
220x260x16 HDS1 R | 220 | 260 | 16 | Seals |
---|---|---|---|---|
50x75x10 HMSA10 RG | 50 | 75 | 10 | Seals |
6309-ZNR | 45 | 100 | 25 | Bearings, units and housings |
67560 | 171.45 | 218.948 | - | Seals |
99286 | 72.8726 | 80.9752 | 23.8252 | Seals |
NU 320 ECP | 100 | 215 | 47 | Bearings, units and housings |
PCM 202325 E | 20 | 23 | 25 | Bearings, units and housings |
PCM 303430 E | 30 | 34 | 30 | Bearings, units and housings |
S7017 CB/P4A | 85 | 130 | 22 | Bearings, units and housings |
SYR 3 11/16 | 93.6625 | - | - | Bearings, units and housings |
SYE 1 3/4 N | 44.45 | - | - | Bearings, units and housings |
Z 202 F | 15 | - | 4 | Seals |
Hot number:
200x250x15 CRSH1 R
212
239/900 CAK/W33
294/530 EM
331713 A
470921
6209-RSH
718/530 AMB
7419 GAM
C 2234
OKCX 750
NKI 85/26
NN 3009 KTN/SP
OKF 260
S7018 ACB/P4A
Previous:SAF 22220 Bearings, units and housings ---- Next:SAF 22220 TLC Bearings, units and housings
Return to SKF bearing