

| da | 70 | mm | |
| db | 82.55 | mm | |
| dc | 66.675 | mm | |
| Da | 150 | mm | |
| Ca | 60.808 | mm | |
| A1 | 88.9 | mm | |
| S | 4.763 | mm | |
| ba | 42.069 | mm | |
| H | 187.325 | mm | |
| H1 | 95.25 | mm | |
| H2 | 33.337 | mm | |
| J | min. | 263.525 | mm |
| J | max. | 295.275 | mm |
| J1 | 53.975 | mm | |
| L | 330.2 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 53.975 | mm | |
| R2 | 22.225 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 37.306 | mm | |
| End plug (suffix Y) |
EPR 8
|
|||
| Max. speed for Taconite seal | 925 | r/min |

| P60° | 92.5 | kN | |
| P90° | 55.6 | kN | |
| P120° | 34.7 | kN | |
| P150° | 30.7 | kN | |
| P180° | 37.8 | kN | |
| Pa | 24.5 | kN |
| Mass pillow block | 19.4 | kg |
| Cap bolt |
2 x 5/8-11 UNC
|
|||
| Cap bolt recommended tightening torque | 298.3 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 110.56 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1310 EKTN9 + H 310 | 45 | 110 | 27 | Bearings, units and housings |
|---|---|---|---|---|
| 19219 | 49.2252 | 63.55 | 7.14 | Seals |
| 405504 | 495 | - | - | Seals |
| 50x68x8 HMSA10 V | 50 | 68 | 8 | Seals |
| 52x72x10 HMS5 RG | 52 | 72 | 10 | Seals |
| 6203/HR11TN | 17 | 40 | 12 | Bearings, units and housings |
| BSD 4090 C | 40 | 90 | 20 | Bearings, units and housings |
| K 89414 TN | 70 | 150 | Bearings, units and housings | |
| SAF 22534 x 5.13/16 T | 147.6375 | - | - | Bearings, units and housings |
| SAFS 22540 x 7.1/8 TLC | 180.975 | - | - | Bearings, units and housings |
| SAFS 22640 x 7.1/8 | 180.975 | - | - | Bearings, units and housings |
| SNP 3284x15.3/4 | 400.05 | 490.6772 | 337.6168 | Bearings, units and housings |
Hot number:
11334
22214 E
55x90x10 HMS5 V
585 VE R
91370
H 2320 E
N 1016 KTNHA/HC5SP
NA 4852
NCF 2948 CV
NJ 422
NRT 395 B
NUP 2211 ECPH/C3
OKBS 57
SNW 16x2.11/16
SY 2.3/16 DUTF
Previous:FSAF 22314 Bearings, units and housings ---- Next:FSAF 22314 TLC Bearings, units and housings
Return to SKF bearing