da | 76.2 | mm | |
Da | 150 | mm | |
Ca | 45.796 | mm | |
A1 | 88.9 | mm | |
A2 | 198.438 | mm | |
S | 4.763 | mm | |
ba | 35.719 | mm | |
H | 182.166 | mm | |
H1 | 95.25 | mm | |
H2 | 31.75 | mm | |
J | min. | 250.825 | mm |
J | max. | 279.4 | mm |
J1 | 53.975 | mm | |
L | 330.2 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 53.975 | mm | |
R2 | 22.225 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
End plug (suffix Y) |
EPR 9
|
Max. speed for Taconite seal | 1050 | r/min |
P60° | 61.4 | kN | |
P90° | 36.9 | kN | |
P120° | 23.1 | kN | |
P150° | 20.9 | kN | |
P180° | 25.4 | kN | |
Pa | 9.25 | kN |
Mass pillow block | 17.9 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 110.56 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1213 ETN9 | 65 | 120 | 23 | Bearings, units and housings |
---|---|---|---|---|
265x310x16 HDS1 R | 265 | 310 | 16 | Seals |
51196 F | 480 | 580 | 80 | Bearings, units and housings |
6307 NR | 35 | 80 | 21 | Bearings, units and housings |
650x710x25 HDS2 R | 650 | 710 | 25 | Seals |
71812 ACD/P4 | 60 | 78 | 10 | Bearings, units and housings |
7207 ACD/HCP4A | 35 | 72 | 17 | Bearings, units and housings |
BT4B 328871 BG/HA1VA902 | 609.6 | 787.4 | - | Bearings, units and housings |
ECY 210 | - | - | - | Bearings, units and housings |
PCM 404430 M | 40 | 44 | 30 | Bearings, units and housings |
SI 15 C | 15 | - | 12 | Bearings, units and housings |
SSAFS 22536 x 6.1/2 | 165.1 | - | - | Bearings, units and housings |
Hot number:
15230
175x200x15 HMS5 V
3204 A-2RS1
3621
401905
4991
6309 M
63733
87067
C 3144
NJ 2328 ECML
PCMF 151717 E
PCZ 0612 E
SAFS 22244 TLC
SAFS 23048 KA x 9
Previous:FSAF 22517 x 3 Bearings, units and housings ---- Next:FSAF 22517 x 3 TLC Bearings, units and housings
Return to SKF bearing