da | 73.025 | mm | |
Da | 150 | mm | |
Ca | 45.796 | mm | |
A1 | 88.9 | mm | |
A2 | 198.438 | mm | |
S | 4.763 | mm | |
ba | 35.719 | mm | |
H | 180.975 | mm | |
H1 | 95.25 | mm | |
H2 | 31.75 | mm | |
J | min. | 250.825 | mm |
J | max. | 279.4 | mm |
L | 330.2 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 53.975 | mm | |
R2 | 22.225 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
Housing |
SAF 517
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-17-14
|
|||
Taconite seal | TER 52 | |||
|
End plug (suffix Y) |
EPR 9
|
Max. speed for Taconite seal | 1050 | r/min |
P60° | 84.5 | kN | |
P90° | 50.7 | kN | |
P120° | 31.6 | kN | |
P150° | 28.5 | kN | |
P180° | 34.7 | kN | |
Pa | 9.25 | kN |
Mass pillow block | 18 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 110.56 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
BD-22264 CCK/W33-AOH 2264 G | 300 | 580 | 150 | Bearings, units and housings |
---|---|---|---|---|
6306-Z | 30 | 72 | 19 | Bearings, units and housings |
90822 | - | - | 50 | Seals |
91331 | - | - | 57.15 | Seals |
GE 25 ES-2LS | 25 | 42 | 20 | Bearings, units and housings |
NNU 4921 BK/SPW33 | 105 | 145 | 40 | Bearings, units and housings |
SAF 1313 TLC | 65 | - | - | Bearings, units and housings |
SAFS 22522 x 3.11/16 T | 93.6625 | - | - | Bearings, units and housings |
SNL 3148 G | 240 | - | - | Bearings, units and housings |
SNL 3236 | 160 | - | - | Bearings, units and housings |
SSAFS 22234 TLC | 170 | - | - | Bearings, units and housings |
W 630/3 R-2Z | 3 | 9 | 5 | Bearings, units and housings |
Hot number:
19219
22318 EKJA/VA405
BD-23226 CCK/W33-AHX 3226 G
618/670 MA
6209/HR22T2
BT1B 334018/HA5
C 3064 M
GEP 440 FS
H 2317
NA 6911
NU 2312 ECML
PL 900
SALA 80 ESX-2LS
SNL 3048 G
SNW 44x7.15/16
Previous:SAF 22517 x 2.7/8 Bearings, units and housings ---- Next:SAF 22517 x 2.7/8 TLC Bearings, units and housings
Return to SKF bearing