da | 47.625 | mm | |
Da | 120 | mm | |
Ca | 52.807 | mm | |
A1 | 79.375 | mm | |
A2 | 196.85 | mm | |
S | 4.763 | mm | |
ba | 36.513 | mm | |
H | 157.162 | mm | |
H1 | 82.55 | mm | |
H2 | 30.163 | mm | |
J | min. | 206.375 | mm |
J | max. | 241.3 | mm |
J1 | 50.8 | mm | |
L | 279.4 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 44.45 | mm | |
R2 | 25.4 | mm | |
RG | 1/4 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 36.513 | mm |
Housing |
FSAF 611
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-13-11
|
|||
Taconite seal | TER 23 | |||
|
End plug (suffix Y) |
EPR 5
|
Max. speed for Taconite seal | 1575 | r/min |
P60° | 35.6 | kN | |
P90° | 21.4 | kN | |
P120° | 13.3 | kN | |
P150° | 12 | kN | |
P180° | 14.2 | kN | |
Pa | 6.94 | kN |
Mass pillow block | 14.1 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 68.04 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
25x40x7 HMSA10 V | 25 | 40 | 7 | Seals |
---|---|---|---|---|
27x52x8 CRW1 R | 27 | 52 | 8 | Seals |
315982 | 730 | 960 | - | Bearings, units and housings |
51124 | 120 | 155 | 25 | Bearings, units and housings |
46208 | 117.475 | 146.08 | 12.7 | Seals |
71917 ACE/P4A | 85 | 120 | 18 | Bearings, units and housings |
95x120x12 CRWA1 V | 95 | 120 | 12 | Seals |
ECCN 070 R | 31 | 203 | - | Coupling systems |
NUP 220 ECP | 100 | 180 | 34 | Bearings, units and housings |
PWM 150165120 | 152 | 165 | 120 | Bearings, units and housings |
RNA 4901 | 16 | 24 | 13 | Bearings, units and housings |
SYNT 35 LTS | 35 | - | - | Bearings, units and housings |
Hot number:
23022 CCK/W33
294/630 EM
402204
409500
6004/HR11TN
6005 N
7060 BGM
89172 M
NU 319 ECM/C3VL0241
SAFS 22220-11 TLC
SNP 3264x12
SSAFS 23056 KATLC x 9.15/16
SYK 30 WD
SYNT 60 L
YSA 211-2FK + HE 2311 B
Previous:FSAF 22611 x 1.7/8 Bearings, units and housings ---- Next:FSAF 22611 x 2 Bearings, units and housings
Return to SKF bearing