

| da | 50.8 | mm | |
| Da | 120 | mm | |
| Ca | 52.807 | mm | |
| A1 | 79.375 | mm | |
| A2 | 123.825 | mm | |
| S | 4.763 | mm | |
| ba | 36.513 | mm | |
| H | 157.162 | mm | |
| H1 | 82.55 | mm | |
| H2 | 30.163 | mm | |
| J | min. | 206.375 | mm |
| J | max. | 241.3 | mm |
| J1 | 50.8 | mm | |
| L | 279.4 | mm | |
| N1 | 15.875 | mm | |
| Threaded holes | |||
| R1 | 44.45 | mm | |
| R2 | 25.4 | mm | |
| RG | 1/4 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 36.513 | mm | |
| End plug (suffix Y) |
EPR 5
|
|||
| Bearing limiting speed | 5600 | r/min |

| P60° | 35.6 | kN | |
| P90° | 21.4 | kN | |
| P120° | 13.3 | kN | |
| P150° | 12 | kN | |
| P180° | 14.2 | kN | |
| Pa | 6.94 | kN |
| Mass pillow block | 14.1 | kg |
| Cap bolt |
2 x 1/2-13 UNC
|
|||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.5 | in | |
| Initial grease fill | 68.04 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1217 K | 85 | 150 | 28 | Bearings, units and housings |
|---|---|---|---|---|
| 17718 | 44.45 | 77.75 | 9.53 | Seals |
| BD-241/670 ECAK30/W33-AOH 241/670 | 630 | 1090 | 412 | Bearings, units and housings |
| 25x47x7 HMSA10 RG | 25 | 47 | 7 | Seals |
| 26368 | 66.675 | 112.73 | 11.13 | Seals |
| 6004/HR22T2 | 20 | 42 | 12 | Bearings, units and housings |
| 608/560 MA | 560 | 680 | 37 | Bearings, units and housings |
| H 316 E | 70 | 105 | 59 | Bearings, units and housings |
| NJ 1064 MA | 320 | 480 | 74 | Bearings, units and housings |
| NNCL 4868 CV | 340 | 420 | 80 | Bearings, units and housings |
| PCMF 081009.5 E | 8 | 10 | 9.5 | Bearings, units and housings |
| SAF 22617 x 2.7/8 | 73.025 | - | - | Bearings, units and housings |
Hot number:
11553
23026-2CS5/VT143
305805 C-2RS1
32318 B
331607 A
48769
51204 V/HR22T2
6206-2Z/VA201
7573
FSAF 1220 T
NU 2088 ECMA
NUP 308 ECP
SE 212
SILKAC 6 M
W 618/2 XR
Previous:FSAF 22611 x 1.7/8 T Bearings, units and housings ---- Next:FSAF 22611 x 2 T Bearings, units and housings
Return to SKF bearing