da | 76.2 | mm | |
Da | 180 | mm | |
Ca | 69.799 | mm | |
A1 | 111.125 | mm | |
A2 | 231.775 | mm | |
S | 4.763 | mm | |
ba | 48.419 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
J1 | 60.325 | mm | |
L | 387.35 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 44.45 | mm |
End plug (suffix Y) |
EPR 10
|
Max. speed for Taconite seal | 1050 | r/min |
P60° | 104 | kN | |
P90° | 62.3 | kN | |
P120° | 39.1 | kN | |
P150° | 35.6 | kN | |
P180° | 42.7 | kN | |
Pa | 15.3 | kN |
Mass pillow block | 34 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1550160 | 393.7 | 428.63 | 15.88 | Seals |
---|---|---|---|---|
22309 E | 45 | 100 | 36 | Bearings, units and housings |
3213 A-2RS1 | 65 | 120 | 38.1 | Bearings, units and housings |
44x62x10 HMSA10 RG | 44 | 62 | 10 | Seals |
48692 | 123.825 | 152.43 | 12.7 | Seals |
60x82x12 HMSA10 V | 60 | 82 | 12 | Seals |
6318/C3VL0241 | 90 | 190 | 43 | Bearings, units and housings |
70x90x12 HMSA10 RG | 70 | 90 | 12 | Seals |
81105 TN | 25 | 42 | 11 | Bearings, units and housings |
9998 | 25.4 | 44.5 | 6.35 | Seals |
S71916 ACB/P4A | 80 | 110 | 16 | Bearings, units and housings |
SYR 2 3/16 N-118 | 55.5625 | - | - | Bearings, units and housings |
Hot number:
108x140x15 HMS5 V
23841
25x42x6 HMSA10 RG
315913
280x320x20 HDS1 R
435 VRME R
7005 CD/P4AH
710 VRME R
91319
9686
BT1B 328284/HA1
BC4B 316341/HA4
BT4-8037 G/HA1VA901
D/W RW144
QJ 236 N2MA
Previous:FSAF 22617 x 3 Bearings, units and housings ---- Next:FSAF 22617 x 3 TLC Bearings, units and housings
Return to SKF bearing