

| da | 76.2 | mm | |
| Da | 180 | mm | |
| Ca | 69.799 | mm | |
| A1 | 111.125 | mm | |
| A2 | 173.037 | mm | |
| S | 4.763 | mm | |
| ba | 48.419 | mm | |
| H | 222.25 | mm | |
| H1 | 114.3 | mm | |
| H2 | 44.45 | mm | |
| J | min. | 295.275 | mm |
| J | max. | 333.375 | mm |
| J1 | 60.325 | mm | |
| L | 387.35 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 65.088 | mm | |
| R2 | 30.163 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 44.45 | mm | |
| End plug (suffix Y) |
EPR 10
|
|||
| Max. speed for PosiTrac Plus seal | 1950 | r/min |

| P60° | 104 | kN | |
| P90° | 62.3 | kN | |
| P120° | 39.1 | kN | |
| P150° | 35.6 | kN | |
| P180° | 42.7 | kN | |
| Pa | 15.3 | kN |
| Mass pillow block | 34 | kg |
| Cap bolt |
2 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 515.2 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 181.44 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 180x200x12 CRS1 R | 180 | 200 | 12 | Seals |
|---|---|---|---|---|
| 210x250x20 HDS1 V | 210 | 250 | 20 | Seals |
| 470x530x26 HDS2 R | 470 | 530 | 26 | Seals |
| 524232 | 1308.1 | - | - | Seals |
| 7214 BEGAF | 70 | 125 | 24 | Bearings, units and housings |
| 91235 | 231.775 | 282.5 | 20.62 | Seals |
| GE 90 TXG3A-2LS | 90 | 130 | 50 | Bearings, units and housings |
| H 3036 | 160 | 210 | 109 | Bearings, units and housings |
| N 322 ECM | 110 | 240 | 50 | Bearings, units and housings |
| N 326 ECP | 130 | 280 | 58 | Bearings, units and housings |
| SAF 1215 TLC | 75 | - | - | Bearings, units and housings |
| WBB1-8701 R | 2 | 7 | 2.5 | Bearings, units and housings |
Hot number:
32938
593/592 A
7314 BEGAY
73745
D/W R3 R-2RS1
GEC 530 FBAS
HA 2315
K 68x74x35 ZW
KD2-153
PCM 10010580 M
PCM 404450 E
S71918 CE/P4A
SAF 22334
SAF 22532 x 5.3/8 T
SSAFS 22215 T
Previous:FSAF 22617 x 3 T Bearings, units and housings ---- Next:FSAF 23024 KA x 4 Bearings, units and housings
Return to SKF bearing