da | 73.025 | mm | |
Da | 180 | mm | |
Ca | 69.799 | mm | |
A1 | 111.125 | mm | |
A2 | 173.037 | mm | |
S | 4.763 | mm | |
ba | 48.419 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 66.675 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 44.45 | mm |
Housing |
SAF 617
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-20-17
|
|||
Labyrinth ring |
2 x LOR 183
|
|||
PosiTrac Plus contact element |
2 x B10724-184
|
|||
|
End plug (suffix Y) |
EPR 10
|
Max. speed for PosiTrac Plus seal | 1950 | r/min |
P60° | 94.3 | kN | |
P90° | 56.5 | kN | |
P120° | 35.6 | kN | |
P150° | 32 | kN | |
P180° | 38.3 | kN | |
Pa | 15.3 | kN |
Mass pillow block | 33.9 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
2150380 | 546.1 | 590.55 | 19.05 | Seals |
---|---|---|---|---|
534953 | 22.225 | 41.25 | 6.502 | Seals |
7032 ACD/HCP4A | 160 | 240 | 38 | Bearings, units and housings |
BS2-2310-2RS/VT143 | 50 | 110 | 45 | Bearings, units and housings |
FY 1.1/2 FM | 38.1 | - | - | Bearings, units and housings |
GEH 20 ES-2RS | 20 | 42 | 16 | Bearings, units and housings |
K 30x40x18 | 30 | 40 | 18 | Bearings, units and housings |
NJ 2311 ECPH | 55 | 120 | 43 | Bearings, units and housings |
NJ 2326 ECML | 130 | 280 | 93 | Bearings, units and housings |
OKBS 59 | 59 | - | - | |
OKBS 96 | 96 | - | - | |
SAFS 23056 KA x 10.1/2 | 266.7 | - | - | Bearings, units and housings |
Hot number:
1125524
214-2Z
217
6007/HR22T2
6013-2RS1
708 CE/HCP4AH
FSNL 524-620
MB 10 A
N 312 ECP
NATV 12 PPA
PCZ 1612 M
S7207 ACD/HCP4A
SYE 2-18
W 61900 R-2Z
XHCE 060/OK 160
Previous:SAF 22617 x 2.7/8 T Bearings, units and housings ---- Next:SAF 22617 x 3 Bearings, units and housings
Return to SKF bearing