da | 76.2 | mm | |
Da | 180 | mm | |
Ca | 69.799 | mm | |
A1 | 111.125 | mm | |
A2 | 231.775 | mm | |
S | 4.763 | mm | |
ba | 48.419 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 66.675 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 44.45 | mm |
End plug (suffix Y) |
EPR 10
|
Max. speed for Taconite seal | 1050 | r/min |
P60° | 94.3 | kN | |
P90° | 56.5 | kN | |
P120° | 35.6 | kN | |
P150° | 32 | kN | |
P180° | 38.3 | kN | |
Pa | 15.3 | kN |
Mass pillow block | 33.9 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
23x40x10 HMS5 RG | 23 | 40 | 10 | Seals |
---|---|---|---|---|
38713 | 98.425 | 130.02 | 11.13 | Seals |
470386 | 376 | - | - | Seals |
7040 ACD/P4AH1 | 200 | 310 | 51 | Bearings, units and housings |
71903 ACE/HCP4AH | 17 | 30 | 7 | Bearings, units and housings |
91319 | - | - | 49.987 | Seals |
K 23x35x16 TN | 23 | 35 | 16 | Bearings, units and housings |
MS 3164 | - | - | 24 | Bearings, units and housings |
NATR 17 PPA | 17 | 40 | 20 | Bearings, units and housings |
NCF 3080 CV | 400 | 600 | 148 | Bearings, units and housings |
NJ 2220 ECJ | 100 | 180 | 46 | Bearings, units and housings |
NKI 100/30 | 100 | 130 | 30 | Bearings, units and housings |
Hot number:
100x150x12 HMS5 V
32016 X/DF
32212/DF
6215 M
7020 ACE/HCP4A
7218 BEGAY
780 VRME R
99118
99819
FSAF 22520 x 3.1/2 T
PBM 101610 M1
PWM 105120120
S71907 CB/HCP4A
S71915 ACB/P4A
YEL 206-104-2F
Previous:SAF 22617 x 3 Bearings, units and housings ---- Next:SAF 22617 x 3 TLC Bearings, units and housings
Return to SKF bearing