

| da | 161.925 | mm | |
| Da | 319.999 | mm | |
| Ca | 95.809 | mm | |
| A1 | 180.975 | mm | |
| A2 | 317.5 | mm | |
| S | 4.763 | mm | |
| ba | 75.406 | mm | |
| H | 377.825 | mm | |
| H1 | 190.5 | mm | |
| H2 | 76.2 | mm | |
| L | 679.45 | mm | |
| Threaded holes | |||
| R1 | 114.3 | mm | |
| R2 | 41.275 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 60.325 | mm | |
| Housing |
SSAFS 536
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-36-30
|
|||
| Taconite seal | TER 147 | |||
|
||||
| End plug (suffix Y) |
EPR 19
|
|||
| Max. speed for Taconite seal | 460 | r/min |

| P60° | 234 | kN | |
| P90° | 140 | kN | |
| P120° | 84.5 | kN | |
| P150° | 75.6 | kN | |
| P180° | 89 | kN | |
| Pa | 46.3 | kN |
| Mass pillow block | 197 | kg |
| Cap bolt |
4 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 359.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 1304.1 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 100x125x12 HMSA10 V | 100 | 125 | 12 | Seals |
|---|---|---|---|---|
| 15655 | 39.7002 | 63.55 | 7.95 | Seals |
| 546966 | 12.7 | 31.75 | 6.35 | Seals |
| 61903-2RZ | 17 | 30 | 7 | Bearings, units and housings |
| 62307-2RS1 | 35 | 80 | 31 | Bearings, units and housings |
| 6317 M | 85 | 180 | 41 | Bearings, units and housings |
| 7003 CE/HCP4AH | 17 | 35 | 10 | Bearings, units and housings |
| 9835 | 25.4 | 36.5 | 6.35 | Seals |
| FY 35 LDW | 35 | - | - | Bearings, units and housings |
| GEP 140 FS | 140 | 210 | 95 | Bearings, units and housings |
| OKCX 640 | 640 | - | ||
| SAF 1520 x 3.3/8 TLC | 85.725 | - | - | Bearings, units and housings |
Hot number:
11673
16 VS R
23956 CCK/W33
27x37x7 HMS5 RG
3212 A-2Z
361207 R
6004/HC5C3
61932
6211-RSH
BD-C 3172 KM-AOH 3172 G
NCF 29/630 V
OH 31/560 H
SAF 1611 x 1.7/8 T
SAF 22518 x 3.1/16 TLC
SYFWK 35 LTA
Previous:SSAFS 22536 x 6.3/8 Bearings, units and housings ---- Next:SSAFS 22536 x 6.3/8 TLC Bearings, units and housings
Return to SKF bearing