

| da | 163.512 | mm | |
| Da | 319.999 | mm | |
| Ca | 95.809 | mm | |
| A1 | 180.975 | mm | |
| A2 | 317.5 | mm | |
| S | 4.763 | mm | |
| ba | 75.406 | mm | |
| H | 377.825 | mm | |
| H1 | 190.5 | mm | |
| H2 | 76.2 | mm | |
| L | 679.45 | mm | |
| Threaded holes | |||
| R1 | 114.3 | mm | |
| R2 | 41.275 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 60.325 | mm | |
| Housing |
SSAFS 536
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-36-30
|
|||
| Taconite seal | TER 148 | |||
|
||||
| End plug (suffix Y) |
EPR 19
|
|||
| Max. speed for Taconite seal | 460 | r/min |

| P60° | 234 | kN | |
| P90° | 140 | kN | |
| P120° | 84.5 | kN | |
| P150° | 75.6 | kN | |
| P180° | 89 | kN | |
| Pa | 46.3 | kN |
| Mass pillow block | 197 | kg |
| Cap bolt |
4 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 359.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 1304.1 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 18657 | 47.625 | 69.85 | 7.95 | Seals |
|---|---|---|---|---|
| 195x230x15 CRSH1 R | 195 | 230 | 15 | Seals |
| 21302 | 53.975 | 82.58 | 11.13 | Seals |
| 22313 E/VA405 | 65 | 140 | 48 | Bearings, units and housings |
| 52234 M | 150 | 240 | 97 | Bearings, units and housings |
| 6307-2Z/VA208 | 35 | 80 | 21 | Bearings, units and housings |
| 6383 | 15.875 | 34.93 | 6.35 | Seals |
| 86841 | - | - | 50.8 | Seals |
| FYWK 40 YTA | 40 | - | - | Bearings, units and housings |
| MB 9 | 45 | 69 | - | Bearings, units and housings |
| SAFS 22538 x 6.13/16 TLC | 173.0375 | - | - | Bearings, units and housings |
| SAW 23524 x 4.1/4 | 107.95 | - | - | Bearings, units and housings |
Hot number:
24x50x10 HMS5 RG
33013T60/DB
7009 CE/P4AH1
706 CD/HCP4AH
BD-C 30/670 KM-OH 30/670 H
NJ 2209 ECNJ
NU 211 ECM
PBM 7590140 M1G1
RNA 4822
S71907 CD/P4A
SHR 15
SNL 3048 G
SYK 35 TF
TUWK 1.1/4 LTA
W 639/2.5 R-2ZS
Previous:SSAFS 22536 Bearings, units and housings ---- Next:SSAFS 22536 TLC Bearings, units and housings
Return to SKF bearing