Housing material | Cast iron |
d | 20.638 | mm | |
A | 30 | mm | |
A1 | 12 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 20.5 | mm | |
B | 34.1 | mm | |
Da | H11 | 74.6 | mm |
Db1 | 65 | mm | |
Db2 | 71 | mm | |
J | 70 | mm | |
L | 95 | mm | |
N | 11.5 | mm | |
s1 | 19.8 | mm | |
T | 38.8 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 21 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 83 | mm | |
J7 | 19 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 14 | kN | |
Basic static load rating | C0 | 7.8 | kN | |
Fatigue load limit | Pu | 0.335 | kN | |
Limiting speed | 7000 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 0.73 | kg |
Thread grub screw | G2 | 1/4-28 UNF | ||
Hexagonal key size for grub screw | N | 3.175 | mm | |
Recommended tightening torque for grub screw | 4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Housing | ||||
Bearing |
YAR 205-013-2F
|
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
14804 | 38.1 | 47.6 | 4.78 | Seals |
---|---|---|---|---|
1850 VRME R | 1714 | - | - | Seals |
20x30x7 CRS1 V | 20 | 30 | 7 | Seals |
61912 | 60 | 85 | 13 | Bearings, units and housings |
7003 CE/P4AH | 17 | 35 | 10 | Bearings, units and housings |
C 39/560 KM | 560 | 750 | 140 | Bearings, units and housings |
MB 20 A | 100 | 142 | - | Bearings, units and housings |
NN 3024 TN9/SP | 120 | 180 | 46 | Bearings, units and housings |
PFD 1. TF | 25.4 | - | - | Bearings, units and housings |
S71908 ACB/HCP4A | 40 | 62 | 12 | Bearings, units and housings |
SD 20x26x4 | 20 | 26 | 4 | Seals |
SNW 36x6.7/16 | 163.5125 | 230.3272 | 127.7112 | Bearings, units and housings |
Hot number:
11130
15097
24152 CC/W33
24x40x7 HMS5 V
400325
630x670x20 HDS1 R
65x85x12 HMSA10 RG
71905 CE/P4A
7205 CD/P4A
7313 BEGAP
NJ 207 ECPH
NUP 309 ECML
PCZ 1212 M
SAF 22222 TLC
SYNT 55 F
Previous:FY 12 TF Bearings, units and housings ---- Next:FY 15 FM Bearings, units and housings
Return to SKF bearing