Housing material | Cast iron |
d | 68.262 | mm | |
A | 52.5 | mm | |
A1 | 17 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 39 | mm | |
B | 68.3 | mm | |
Da | H11 | 161.9 | mm |
Db1 | 142 | mm | |
Db2 | 154 | mm | |
J | 149.5 | mm | |
L | 187 | mm | |
N | 18 | mm | |
s1 | 42.9 | mm | |
T | 76.9 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 34.5 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 169 | mm | |
J7 | 51 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 57.2 | kN | |
Basic static load rating | C0 | 40 | kN | |
Fatigue load limit | Pu | 1.7 | kN | |
Limiting speed | 3000 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 4.65 | kg |
Thread grub screw | G2 | 3/8-24 UNF | ||
Hexagonal key size for grub screw | N | 4.763 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 16 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.625 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
15097 | 38.1 | 62 | 7.95 | Seals |
---|---|---|---|---|
17x34x7.9 CRSA1 P | 17 | 34 | 7.9 | Seals |
27723 | 70.0024 | 86.995 | 8.509 | Seals |
344/332 AA | 40 | 80 | 21 | Bearings, units and housings |
45x62x8 HMS5 V | 45 | 62 | 8 | Seals |
BT4B 334095 G/HA4VA901 | 430 | 575 | - | Bearings, units and housings |
IR 15X20X12 IS1 | 15 | 20 | 12 | Bearings, units and housings |
NU 317 ECP | 85 | 180 | 41 | Bearings, units and housings |
PCMF 182017 E | 18 | 20 | 17 | Bearings, units and housings |
QJ 308 MA | 40 | 90 | 23 | Bearings, units and housings |
SAF 1520 x 3.3/8 TLC | 85.725 | - | - | Bearings, units and housings |
SNLN 3026 | 130 | - | - | Bearings, units and housings |
Hot number:
1250 VL R
12565
16052 MA
216-ZNR
55x70x8 HMSA10 V
6213
6338
80x110x10 HMSA10 V
K 50x55x13.5
KR 35 PPA
NA 4903 RS
OKC 820
PWTR 50.2RS
SAF 22522 x 3.7/8 TLC
Z 010
Previous:FY 2.1/4 TF Bearings, units and housings ---- Next:FY 2.15/16 DUTF Bearings, units and housings
Return to SKF bearing