|
||||
Housing material | Cast iron |
d | 20 | mm | |
A | 27 | mm | |
A1 | 12 | mm | |
A3 | H14 | 3.2 | mm |
B1 | 35 | mm | |
Da | H11 | 74.6 | mm |
Db1 | 66 | mm | |
Db2 | 72 | mm | |
J | 70 | mm | |
L | 95 | mm | |
N | 12 | mm | |
s1 | ≈ | 20.5 | mm |
T | 36.5 | mm | |
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 18.5 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 83 | mm | |
J7 | 19 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 14 | kN | |
Basic static load rating | C0 | 7.8 | kN | |
Fatigue load limit | Pu | 0.335 | kN | |
Limiting speed | 7000 | r/min |
Mass bearing unit | 0.73 | kg |
Appropriate spanner | HN 5-6 | |||
Recommended lock nut tightening angle | a | 90 | ° | |
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
12631 | 31.75 | 62 | 6.35 | Seals |
---|---|---|---|---|
22232-2CS5/VT143 | 160 | 290 | 80 | Bearings, units and housings |
25x52x8 CRW1 R | 25 | 52 | 8 | Seals |
409002 | 825 | - | - | Seals |
523587 | 330.2 | - | - | Seals |
95062 | 241.3 | 292.1 | 15.88 | Seals |
C 4022 V | 110 | 170 | 60 | Bearings, units and housings |
IR 10X14X12 IS1 | 10 | 14 | 12 | Bearings, units and housings |
SAF 23024 KATLC x 4 | 107.95 | - | - | Bearings, units and housings |
SAF 23028 KA x 4.15/16 | 125.4125 | - | - | Bearings, units and housings |
SAFS 22540 x 7.1/8 TLC | 180.975 | - | - | Bearings, units and housings |
SSAFS 23024 KATLC x 4.1/8 | 104.775 | - | - | Bearings, units and housings |
Hot number:
125x200x15 HMSA10 RG
BD-23056 CCK/W33-AOH 3056
55x80x8 CRW1 V
FYTJ 50 KF
IR 5x8x16
K 70x78x30
KMTA 10
NJ 2203 ECP
NJ 2315 ECP
NK 73/35
OH 3292 H
SI 60 TXE-2LS
Z 207 F
SYFWK 20 LTHR
SYJ 20 TF
Previous:FYJ 20 TF Bearings, units and housings ---- Next:FYJ 25 TF Bearings, units and housings
Return to SKF bearing