da | 125.412 | mm | |
Da | 250 | mm | |
Ca | 77.8 | mm | |
A1 | 149.225 | mm | |
A2 | 193.675 | mm | |
S | 4.763 | mm | |
ba | 61.119 | mm | |
H | 298.45 | mm | |
H1 | 152.4 | mm | |
H2 | 60.325 | mm | |
L | 511.175 | mm | |
Threaded holes | |||
R1 | 87.313 | mm | |
R2 | 38.1 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 51.594 | mm |
Housing |
SSAFS 528
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-28-0
|
|||
Labyrinth ring |
2 x LOR 122
|
|||
PosiTrac Plus contact element |
2 x B10724-122
|
|||
|
End plug (suffix Y) |
EPR 27
|
Max. speed for PosiTrac Plus seal | 1150 | r/min |
P60° | 249 | kN | |
P90° | 149 | kN | |
P120° | 94.3 | kN | |
P150° | 85.9 | kN | |
P180° | 103 | kN | |
Pa | 28.5 | kN |
Mass pillow block | 94.3 | kg |
Cap bolt |
4 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 481.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
12x30x7 HMSA10 V | 12 | 30 | 7 | Seals |
---|---|---|---|---|
3212 A-2RS1 | 60 | 110 | 36.5 | Bearings, units and housings |
332096 | 482.6 | 615.95 | - | Bearings, units and housings |
6202-RSH | 15 | 35 | 11 | Bearings, units and housings |
7013 ACE/P4AL | 65 | 100 | 18 | Bearings, units and housings |
71901 ACE/P4A | 12 | 24 | 6 | Bearings, units and housings |
BD-C 3088 KMB-AOHX 3088 G | 420 | 650 | 157 | Bearings, units and housings |
FYJ 50 TF | 50 | - | - | Bearings, units and housings |
GE 40 ESL-2LS | 40 | 62 | 28 | Bearings, units and housings |
N 1016 KTNHA/HC5SP | 80 | 125 | 22 | Bearings, units and housings |
SD 19x27x4 | 19 | 27 | 4 | Seals |
W 6200-2Z | 10 | 30 | 9 | Bearings, units and housings |
Hot number:
1350 VL V
23956 CC/W33
24136 CCK30/W33
360x404x20 HDS2 R
470x510x20 HDS1 R
6009/HC5C3
6004 N
6211/HC5C3
87899
71915 ACE/HCP4AH1
FY 30 TF/VA201
NKI 55/35
OKBS 73
OKTC 325
SAF 23026 KA x 4.7/16
Previous:SSAFS 22528 T Bearings, units and housings ---- Next:SSAFS 22528 x 4.13/16 Bearings, units and housings
Return to SKF bearing