

| da | 127 | mm | |
| Da | 250 | mm | |
| Ca | 77.8 | mm | |
| A1 | 149.225 | mm | |
| A2 | 193.675 | mm | |
| S | 4.763 | mm | |
| ba | 61.119 | mm | |
| H | 298.45 | mm | |
| H1 | 152.4 | mm | |
| H2 | 60.325 | mm | |
| L | 511.175 | mm | |
| Threaded holes | |||
| R1 | 87.313 | mm | |
| R2 | 38.1 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 51.594 | mm | |
| Housing |
SSAFS 528
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-28-0
|
|||
| Labyrinth ring |
2 x LOR 123
|
|||
|
||||
| End plug (suffix Y) |
EPR 27
|
|||
| Bearing limiting speed | 3200 | r/min |

| P60° | 249 | kN | |
| P90° | 149 | kN | |
| P120° | 94.3 | kN | |
| P150° | 85.9 | kN | |
| P180° | 103 | kN | |
| Pa | 28.5 | kN |
| Mass pillow block | 94.3 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 799.9 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 481.95 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 100x150x12 HMSA10 V | 100 | 150 | 12 | Seals |
|---|---|---|---|---|
| 108710 | 276.225 | 329.4126 | - | Seals |
| 619/5 | 5 | 13 | 4 | Bearings, units and housings |
| 7218 BEGAY | 90 | 160 | 30 | Bearings, units and housings |
| 90x125x13 CRSH1 R | 90 | 125 | 13 | Seals |
| GB 3020 | - | - | 56 | Bearings, units and housings |
| NKI 32/30 | 32 | 47 | 30 | Bearings, units and housings |
| NU 2207 ECP | 35 | 72 | 23 | Bearings, units and housings |
| OH 30/1060 H | 1000 | 1060 | 447 | Bearings, units and housings |
| SAFS 23056 KAT x 10.1/2 | 266.7 | - | - | Bearings, units and housings |
| PL 52 | - | - | 29.3624 | Bearings, units and housings |
| SAW 23220 | 180 | - | - | Bearings, units and housings |
Hot number:
23976 CC/W33
390 VRME R
51144 M
87901
71920 ACB/HCP4AL
71924 CE/P4AH1
89413 TN
NJ 321 ECJ
NUH 2240 ECMH
NKS 45
NU 307 ECJ
PF 90
S7001 CE/P4A
S7016 CD/HCP4A
SNL 520 TURU
Previous:SSAFS 22528 x 4.7/8 TLC Bearings, units and housings ---- Next:SSAFS 22528 x 5 T Bearings, units and housings
Return to SKF bearing