da | 127 | mm | |
Da | 250 | mm | |
Ca | 77.8 | mm | |
A1 | 149.225 | mm | |
A2 | 193.675 | mm | |
S | 4.763 | mm | |
ba | 61.119 | mm | |
H | 298.45 | mm | |
H1 | 152.4 | mm | |
H2 | 60.325 | mm | |
L | 511.175 | mm | |
Threaded holes | |||
R1 | 87.313 | mm | |
R2 | 38.1 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 51.594 | mm |
Housing |
SSAFS 528
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-28-0
|
|||
Labyrinth ring |
2 x LOR 123
|
|||
PosiTrac Plus contact element |
2 x B10724-122
|
|||
|
End plug (suffix Y) |
EPR 27
|
Max. speed for PosiTrac Plus seal | 1150 | r/min |
P60° | 249 | kN | |
P90° | 149 | kN | |
P120° | 94.3 | kN | |
P150° | 85.9 | kN | |
P180° | 103 | kN | |
Pa | 28.5 | kN |
Mass pillow block | 94.3 | kg |
Cap bolt |
4 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 481.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
115x145x12 HMSA10 RG | 115 | 145 | 12 | Seals |
---|---|---|---|---|
22332 CCK/W33 | 160 | 340 | 114 | Bearings, units and housings |
25x37x6 HMSA10 V | 25 | 37 | 6 | Seals |
590655 | 247.65 | 285.75 | 15.88 | Seals |
65x85x12 HMSA10 V | 65 | 85 | 12 | Seals |
7004 CD/P4AH | 20 | 42 | 12 | Bearings, units and housings |
71922 CD/P4AL | 110 | 150 | 20 | Bearings, units and housings |
KD10-454 | 77 | 324 | - | Coupling systems |
PRM 182120 | 18 | 21 | 20 | Bearings, units and housings |
SAF 1617 x 3 | 76.2 | - | - | Bearings, units and housings |
SALKB 16 F | 16 | - | 21 | Bearings, units and housings |
SY 1.3/4 TF/VA228 | 44.45 | - | - | Bearings, units and housings |
Hot number:
1220 VRME R
25x52x7 HMSA10 V
300x335x18 HDS2 R
332244
340x380x18 HDS2 V
614609
GEZ 304 ES-2LS
HA 3130
IR 40X50X20 IS1
NKXR 35 Z
PCM 101208 E
PCMS 1005002.0 M
S7011 CE/P4A
S71916 CB/HCP4A
W 61904-2RS1
Previous:SSAFS 22528 x 5 T Bearings, units and housings ---- Next:SSAFS 22530 Bearings, units and housings
Return to SKF bearing