

| da | 122.237 | mm | |
| Da | 250 | mm | |
| Ca | 77.8 | mm | |
| A1 | 149.225 | mm | |
| A2 | 193.675 | mm | |
| S | 4.763 | mm | |
| ba | 61.119 | mm | |
| H | 298.45 | mm | |
| H1 | 152.4 | mm | |
| H2 | 60.325 | mm | |
| L | 511.175 | mm | |
| Threaded holes | |||
| R1 | 87.313 | mm | |
| R2 | 38.1 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 51.594 | mm | |
| Housing |
SSAFS 528
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-28-0
|
|||
| Labyrinth ring |
2 x LOR 120
|
|||
|
||||
| End plug (suffix Y) |
EPR 27
|
|||
| Bearing limiting speed | 3200 | r/min |

| P60° | 249 | kN | |
| P90° | 149 | kN | |
| P120° | 94.3 | kN | |
| P150° | 85.9 | kN | |
| P180° | 103 | kN | |
| Pa | 28.5 | kN |
| Mass pillow block | 94.3 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 799.9 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 481.95 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 25x40x8 HMS5 V | 25 | 40 | 8 | Seals |
|---|---|---|---|---|
| 37396 | 95.25 | 120.68 | 11.13 | Seals |
| 5 VS R | 4 | - | - | Seals |
| 6320 M/C3VL0241 | 100 | 215 | 47 | Bearings, units and housings |
| AXK 110145 | 110 | 145 | 4 | Bearings, units and housings |
| FSAF 22518 x 3.1/16 | 77.7875 | - | - | Bearings, units and housings |
| HJ 1034 | 170 | 201.35 | 21 | Bearings, units and housings |
| N 034 | 27.2542 | - | 169.1386 | Bearings, units and housings |
| OKBS 70 | 70 | - | - | |
| PWM 607060 | 60 | 70 | 60 | Bearings, units and housings |
| SYF 25 TF | 25 | - | - | Bearings, units and housings |
| YAR 210-112-2F | 90 | Bearings, units and housings |
Hot number:
36359
50x62x7 HMSA10 V
511/670 M
99814
BT4-8139 G/HA1
BD-C 3160 K-OH 3160 H
FYE 3 7/16
K 89415 M
KML 34
NNCL 4938 CV
NUH 2320 ECMH
PCZ 1008 M
SAF 22622 x 3.7/8
SAF 22536 x 6.3/8
W 6302-2Z
Previous:SSAFS 22528 TLC Bearings, units and housings ---- Next:SSAFS 22528 x 4.13/16 T Bearings, units and housings
Return to SKF bearing