
| d | 15.875 | mm | |
| D | 18.256 | mm | |
| B | 12.7 | mm | |
| M | 3 | mm | |
| c1 | min. | 0.1 | mm |
| c1 | max. | 0.6 | mm |
| c2 | min. | 0.2 | mm |
| c2 | max. | 1 | mm |
| a | ±8 | 20 | ° |
| Shaft diameter range | min. | 15.585 | mm | |
| Shaft diameter range | max. | 15.611 | mm | |
| Housing bore range | min. | 18.255 | mm | |
| Housing bore range | max. | 18.275 | mm |
| Basic dynamic load rating - radial direction | C | 24 | kN | |
| Basic static load rating - radial direction | C0 | 50 | kN | |
| Specific dynamic load factor | K | 120 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 1900 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2.5 | m/s |
| Coefficient of friction | µ | min. | 0.02 | |
| Coefficient of friction | µ | max. | 0.2 |
| Mass bushing | 0.0049 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 230/800 CA/W33 | 800 | 1150 | 258 | Bearings, units and housings |
|---|---|---|---|---|
| 250 VA R | 225 | - | - | Seals |
| 26x38x7 HMS1 R | 26 | 38 | 7 | Seals |
| 340x380x18 HDS2 R | 340 | 380 | 18 | Seals |
| 400044 | 3.2 | - | - | Seals |
| 6313 M | 65 | 140 | 33 | Bearings, units and housings |
| 7007 ACE/HCP4AL1 | 35 | 62 | 14 | Bearings, units and housings |
| 71905 CE/HCP4AL | 25 | 42 | 9 | Bearings, units and housings |
| FY 45 WF | 45 | - | - | Bearings, units and housings |
| LR 22x28x20.5 | 22 | 28 | 20.5 | Bearings, units and housings |
| NJ 2330 ECML | 150 | 320 | 108 | Bearings, units and housings |
| NUP 1880 MP | 400 | 500 | 46 | Bearings, units and housings |
Hot number:
210-ZNR
331677
470 VRME R
524592
BT4B 328965/HA1
BTW 150 CM/SP
BD-C 2213 KTN9-AH 313 G
NA 4917
NU 12/630 ECMA/HB1
NU 1896 MA
NUP 306 ECML
PSM 202520 A51
RNU 212 ECP
SAF 1522 x 3.13/16 TLC
SHR 42
Previous:PCZ 1008 E Bearings, units and housings ---- Next:PCZ 1010 E Bearings, units and housings
Return to SKF bearing